Sponsored

Drivers and Passenger Front Seat Bracket Replacement - 2022 Supercrew

Mark Gale

New Member
First Name
Mark
Joined
Sep 15, 2023
Threads
1
Messages
4
Reaction score
4
Location
Phoenix, AZ
Vehicle(s)
2022 Ford Ranger Sport
Occupation
Plumber
I have not been able to locate aftermarket front seat brackets for my truck. The OEM seats are beat and I want to replace them. Google hasn't been very helpful or may be limited by my poor search ability. I'm looking for an off the shelf solution but would consider a full custom solution.


Thank you!
Sponsored

 

RangerBill

Well-Known Member
First Name
Bob
Joined
Jun 8, 2022
Threads
3
Messages
1,670
Reaction score
2,243
Location
PA
Vehicle(s)
2019 Ford Ranger Lariat Super Crew FX4
Occupation
retired
I have not been able to locate aftermarket front seat brackets for my truck. The OEM seats are beat and I want to replace them. Google hasn't been very helpful or may be limited by my poor search ability. I'm looking for an off the shelf solution but would consider a full custom solution.


Thank you!
Not aftermarket, but junkyard?
 

ScarzRanger21(2.0)

Well-Known Member
First Name
Eric
Joined
Dec 9, 2025
Threads
10
Messages
251
Reaction score
838
Location
Auberry, CA
Vehicle(s)
2021 Ranger 4x4, 2019 Ranger Fx4
Occupation
Electrician
I’m not finding anything online specific to the ranger, just “universal” seat brackets that probably aren’t universal lol. I would do as others suggested, go pull a couple seats out of a wrecked truck at the junkyard and call it good. Or take a gamble and try one of the universal ones, just make sure you can return it if it doesn’t work.
 

airline tech

Well-Known Member
Joined
Aug 24, 2022
Threads
28
Messages
4,506
Reaction score
8,600
Location
Midwest - KS
Vehicle(s)
2022 Ranger Lariat-Super Crew, Cactus Gray
Occupation
Aircraft Tech
I have not been able to locate aftermarket front seat brackets for my truck. The OEM seats are beat and I want to replace them. Google hasn't been very helpful or may be limited by my poor search ability. I'm looking for an off the shelf solution but would consider a full custom solution.


Thank you!
Define what is worn - the cushions or covers or both, those can be replaced, however the seat tracks incorporate a position sensor (ties into the Airbags) on how far forward or aft the seat is. When I last checked this - there is no aftermarket (direct fit) seats , it would require some custom made brackets, which I recall someone on here making as they wanted the seat to push back farther (If I recall correctly) but they kept the OEM seats.
I would have to (check) to be sure (confirm) that even the manual adjusted seats have the position sensors on the tracks.
If you recall - I spent some time trying to get my cushion, modified so it was comfortable and ended with a modified factory cushion, never really got it perfect but its better than the sagging OEM version. I tried various modifications to the seat base assembly, and to be honest its not fully back together (yet) - been busy with other home projects, just need to (re hog) the cover back on the cushion and secure the clips back on the base.

So your best bet (at this point) if only the cushion and cover is worn - is to only replace them vs whole seat - granted anything's possible just may need to modify the attach points and keep it safety rated.
 

dozxab

Well-Known Member
First Name
Dave
Joined
Sep 14, 2024
Threads
13
Messages
556
Reaction score
1,725
Location
Prescott AZ
Vehicle(s)
2022 Ford Ranger XLT FX4, 2014 Jeep Wrangler JK
Occupation
Retired
Define what is worn - the cushions or covers or both, those can be replaced, however the seat tracks incorporate a position sensor (ties into the Airbags) on how far forward or aft the seat is. When I last checked this - there is no aftermarket (direct fit) seats , it would require some custom made brackets, which I recall someone on here making as they wanted the seat to push back farther (If I recall correctly) but they kept the OEM seats.
I would have to (check) to be sure (confirm) that even the manual adjusted seats have the position sensors on the tracks.
If you recall - I spent some time trying to get my cushion, modified so it was comfortable and ended with a modified factory cushion, never really got it perfect but its better than the sagging OEM version. I tried various modifications to the seat base assembly, and to be honest its not fully back together (yet) - been busy with other home projects, just need to (re hog) the cover back on the cushion and secure the clips back on the base.

So your best bet (at this point) if only the cushion and cover is worn - is to only replace them vs whole seat - granted anything's possible just may need to modify the attach points and keep it safety rated.
Are you thinking of these? My brother put some in his '02 Jeep and I seem to remember them being mentioned here. https://desertdoesit.com/collection...+seat+jacker&utm_content=seat+jacker+-+phrase
Sponsored

 
 








Top