PX1 drivers side seat skirt/valance.

[Johnno16]

G'day all.
I bought new seat skirts or valances (the plastic cover on the side of the seat where the seat adjusters lever come through).
Does anyone know the trick to fitting a new one? I've done several searches and checked the manual with no joy. The passenger side wasn't too difficult, but with the seat height lever on the driver's side it's a bit more problematic.
Cheers

Sponsored

 

[RangerBill]

G'day all.
I bought new seat skirts or valances (the plastic cover on the side of the seat where the seat adjusters lever come through).
Does anyone know the trick to fitting a new one? I've done several searches and checked the manual with no joy. The passenger side wasn't too difficult, but with the seat height lever on the driver's side it's a bit more problematic.
Cheers

See if this helps.

 

[Cmar]

Did the clips break off, it doesn't take much of a bump to do it!

 

[Johnno16]

See if this helps.

Thanks mate. It looks like the design is different to mine. The issue is the manual seat height adjuster. If I remove it I'll get the shield on, but the lever won't go back on. Cheers.

 

[Johnno16]

Did the clips break off, it doesn't take much of a bump to do it!

Yeah, and there were cracks right through them.

 

[Cmar]

Yeah, and there were cracks right through them.

Yes my seat covers hold mine on now, sick of replacing them. Just a cheap design. Why do Ford do this, so many good things about the Ranger and then they spoil it with things like this.

Sponsored