Audio Install Issues with For-Ck11

[Sanchovia]

Help! I have an echo issue with my audio.

for-Ck11 T harness used

Audio Control D6.1200 DSP
I’m running my own speaker wires from the amp to each speaker due to upgraded speakers requiring 200W each.

I soldered my 9 wire and matched the colors to the harness. With running my own speaker wires i capped the other end of the T harness, should i solder these into my 9 wire as well or leave them capped?

pictures in the morning will be added

Sponsored

 

[Sanchovia]

Update, Starting tuning and my Rears are not Sounding like my fronts, they sound muffled? or tunneled? if that makes sense. went into Forscan and flattened the EQ this helped quite a bit but not fully

 

[That_one_Ranger]

Update, Starting tuning and my Rears are not Sounding like my fronts, they sound muffled? or tunneled? if that makes sense. went into Forscan and flattened the EQ this helped quite a bit but not fully

Always tune with no eq adjustments generally my rears are slightly quieter as well I think mostly just how the door panel sits around them is just a bit different not familiar with that harness but is I just echoing or creating a high pitch?

 

[Superspirit]

I have used that harness in my Ranger and my Mustang, never had a problem. I flattened the eq curve with forescan and incorporated audio dynamics dsp's in both. Running jl audio 75w/ch amps. Alpine subs and amps. Jl audio c1 speakers in the Ranger and morel's in the mustang. I have no echo's or weird sound what so ever. Just great sounds!

Sponsored