Search results

I recently had to take a 50 mile run between Staunton Va and Monterey Va via a 2 lane road, US 250. About 25 miles is thru some mountain's where there are numerous up's, down's, and 15 mph hair pin curves. Had a chance to play with the 3 trans shifting modes, especially entering and leaving...

Sold our motor home and Subaru we towed. Have a Blue Ox BX7420 Tow Bar set up for sale. It is 3 years old, but shows as perfect condition (always covered when not in use) It is the Avail heavy duty with a 10,000 tow rating. We used it to tow a 3300 lb Subaru Crosstrek, and I always buy/get the...

Wondering if any of you carry a regular electric powered air compressor to use with the 150 watt/12.5 amp power point on the rear of the center console ? I have the pictured Porter Cable compressor I used to carry in our motor home...it's a spare as I have a full size garage compressor. Worked...

In reference to our upcoming travel trailer purchase, and the expected 10 mpg many of you have posted about while towing, do any of you carry an extra container of gas with you ? We do a lot of our traveling on secondary roads and US tagged roadways, and in our motor home with a 55 gallon tank...

Have any of you dealt with Carvana ? We have our Subaru Crosstrek up for sale as we're downsizing and selling our motor home. No longer need the Subi to tow behind the mh. Went on line to Carvana, submitted the needed info, was truthful about condition/mileage, ect. They came back with an...

Sitting here getting ready to watch Thursday Nite Football.... GMC commercial comes on showing the now available stereo speakers housed in their drop down tailgate !!! OMG...what next, a cocktail blender hidden in the bumper ? :headbang:

I may have found a way to seal the tailgate openings against dust/water....long but follow .... Those of you fimilar with RV's with slideouts know the openings have bulb seals and wipers made from rubber, and usually have a very strong double sided adhesive tape. I had some of both on hand...

Working on something for towing and the mirror extensions that are needed. Unfortunately nothing but the strap on type are available. Thinking of a way to mount a mirror but it would require mounting a bracket to the front shell of the mirror. The add on mirror would be removable but the...

Saw this posted somewhere...removing the vinyl overlay on a supercab's centerpost door frame. Any pic's ? Have my heat gun ready and thinkin about it.

I want to get a lower grill insert for my 2021 Ranger, but, it has the collision avoidance system. Does the system still work with any of the grill inserts ? The several different manufacturers of them say they do, or they should, but none really give a definite Yes or No . Any of you with the...

Just saw the news that GM is shutting down production along their entire line of vehicles for at least 2 weeks due to no semi-conductors available. Can only wonder if Ford and the rest won't be too far behind. Probably also means that any separate component under warranty that has/needs a...

While building my doggie platform in place of rear seats, I emptied out the left compartment...took jack and tool pouch out. Found a nice little funnel down there also. Found no mention of it in owners manual, so I figure it's for one of the following... Used to top off blinker fluid reservoir...

A bit long... Was trying to figure a build for a platform for the rear seat area of my Super Cab, for our 2 dogs and their doggie seats, high enough that they would be able to "see outside". I ran across these storage containers. Both look to be sturdy enough as there hard side and hard...

Getting my ducks in a row as to upcoming rv set up... Before I start pulling, prying, ripping, prodding, cursing, how does the kick panel, drivers side, come out so I can access the wiring for the brake control. (yes..truck has tow package). Don't see any hardware or push pin type...

Have lousy knees...arthritis...came up with a "Get into bed of Ranger with bad knees" modification. $41 bucks and I don't have to do a "rolling crawl" to get into the bed. Helps wife also...she's a bit "vertically challenged" :crackup: Little bungee keeps it from sliding around.

Since Ford saw fit not to provide side molding or even accessory molding for the Sup Cab, made my own. Between parking lot perverts and upcoming camping trips, felt the need for them. 2 inch wide from Cowles via Amazon.... Just drivers side for today. Whadda ya think ???

Want to remove them, and I know they won't come straight out. I read somewhere on the forum that if you simply back out the bolt in the safety hole notch the seat will rotate far enough forward to remove them. True ? Or do I need to just pull the entire seat back off ?

I contacted a company, Redline Goods to see if they could possible make padded armrest covers for the 2019-2021 Rangers. I have used their products in the past on several Mustangs. They produce really good quality leather shift boots, emergency brake boots, leather interior accessories and trim...

For any of you that also own an older 2002-2011 Ranger with the 4 cyl Duratec, I have the following for sale. All parts are new, purchased as backup on hand for my previous Ranger that I sold. Want to sell as a complete package as parting each out would not be cost effective. Ford Motorcraft...

I have the tow package and know the 7 pin plug isn't hooked up yet...but is the 4 pin plug integrated and ready to go ?