Search results

It’s really your choice. If you want the AEB functionality then you’ll need the OEM kit. Many here have installed non-OEM and are happy with them.

Also, don’t forget about adding a trailer brake controller.

Being that is fairly close to the edge of the tire, they may refuse to patch and say a new tire is needed. A plug should do fine in this case.

That’s their standard answer when they know something is not right but they either don’t know how to fix it or they choose not to fix it.

If you have iOS, you have to select 'Location' from the main page. PSI and Oil Life, Odometer are under 'Service', then 'Vehicle Health'.

I have the new version on ios. When you first open it, you get the old layout. Select 'Enter New Fordpass' for the new layout. You can switch back and forth from the old to the new (restarts each time). The new version does not work correctly for my 2018 Fusion, but seems to be OK for the...

Your best bet may be to disconnect the battery for a short time to let the hardware reset. You will also need to reset the auto up/down on the driver‘s window afterwards.

On your APIM issues... What version Sync3 are you on? If you have build 22251, then that is most likely the cause of your issues and needs to be updated to build 23188. Do not rely on a wifi connection to tell you if there is an update available as it is not always reliable.

I’m thinking you could get hit with some expense since you modified the system. Most likely, Ford will only support the factory configuration from a warranty perspective. It is possible that if they had to flash anything with factory files/settings, it got the original 4” setup which is not...

Check out this site… https://www.carcomplaints.com/Ford/Ranger/2021/tsbs/

Don’t necessarily rely on the wifi connection to successfully find this update. You may have to go to the website and download to a USB and update manually.

Similar issues in several Sync threads…. Sounds like you are on Sync 3.4, build 22257. Upgrading ti build 23188 should solve your problems.

Be aware that Costco changed their warranty last year. It’s no longer free replacement during the warranty period. Pro-rated only beginning day one. I got one from Walmart last month with a 4 year free replacement.

First, in the about Sync section, see if the modem ESN is displayed or blank. If blank the modem could be bad, or just out of sorts. You can reset it by pulling the Telematics fuse. I think it is fuse #9, but check the manual to be sure. Make sure the fuse is good and after reinstalling it...

Should fix all the Sync functionality issues. As far as FordPass, I believe you’ll need to reactivate it.

Ford made a change with MY20+ APIMs. If you use the Cyan Labs process where the APIM gets reformatted the APIM could be bricked. You can use Cyan Labs for MY20+ vehicles as long as you follow their instructions. The issue can also affect older vehicles if the APIM was replaced with a newer version.

If you are using a Mac, then be sure the USB is set up correctly. Many have had issues with the USB setup on Macs. Can you provide screenshots of the file structure on your USB?

What error message are you getting? Be sure you have the USB set up per the instructions. You could try Cyan Labs but may get the same results. If I were having failed updates along with all the other issues, I would disconnect the battery for a short time to let the hardware reset. After...

Did you check through the radio or the website? If through the radio, that is not always reliable so go to the website and the USB method.

What build Sync3 do you have? If anything lower than build 23188, you need to update. Sounds like you may be on build 22257 which has lots of issues.