Glocker
Well-Known Member
- First Name
- John
- Joined
- Feb 11, 2020
- Threads
- 97
- Messages
- 2,700
- Reaction score
- 8,427
- Location
- Boca Raton
- Vehicle(s)
- 2019 Ford Ranger XLT FX4, 2014 Mustang GT
- Vehicle Showcase
- 1
- Thread starter
- #1
SOLVED!
I snagged a used visor from eBay, from a 2021 Ranger for $29.46 plus shipping. It was really easy to replace the damaged visor. You'll need a really small flat blade screwdriver and a 9/32 socket wrench.
There is a small cover over the mounting point of the visor.
Move the visor out of the way and use a flat blade screwdriver to carefully pop the trim cover off and out of the way.
There is a 9/32 fastener in the hole and the tail of a chord that pokes through the hole. Just remove the bolt and the mounting point is hooked into the roof and comes off easily.
Just make sure the chord of the replacement visor is poking through the hole like the visor coming off. I believe it is possibly a leash to retain the visor in a collision.
Anyways, it was super easy and it took longer to get the replacement piece out of the box and unwrapped than it took to replace.
Replacement visor done!
Here you can see the damage done by the air freshener on the original visor.
Damn beaver!
Somehow an air freshener got folded up on my passenger side visor and it has caused the vinyl covering over the visor so become distorted and wrinkled. I'm going to have to get one off eBay or something because it drives me nuts just knowing it's messed up.
Also, what color/s did they use for the sun visors in 2019? Were they all tan? I can't figure out if what I have is tan or gray, but I'm leaning towards a light tan color.
I snagged a used visor from eBay, from a 2021 Ranger for $29.46 plus shipping. It was really easy to replace the damaged visor. You'll need a really small flat blade screwdriver and a 9/32 socket wrench.
There is a small cover over the mounting point of the visor.
Move the visor out of the way and use a flat blade screwdriver to carefully pop the trim cover off and out of the way.
There is a 9/32 fastener in the hole and the tail of a chord that pokes through the hole. Just remove the bolt and the mounting point is hooked into the roof and comes off easily.
Just make sure the chord of the replacement visor is poking through the hole like the visor coming off. I believe it is possibly a leash to retain the visor in a collision.
Anyways, it was super easy and it took longer to get the replacement piece out of the box and unwrapped than it took to replace.
Replacement visor done!
Here you can see the damage done by the air freshener on the original visor.
Damn beaver!
Somehow an air freshener got folded up on my passenger side visor and it has caused the vinyl covering over the visor so become distorted and wrinkled. I'm going to have to get one off eBay or something because it drives me nuts just knowing it's messed up.
Also, what color/s did they use for the sun visors in 2019? Were they all tan? I can't figure out if what I have is tan or gray, but I'm leaning towards a light tan color.
Sponsored
Last edited:
for such a large store, so I settled for Dr Pepper lol. Next time I may go to the one in TX, see if anything is different.
