What did you receive in the mail today for your Ranger?

[Schafies]

Got my magnetic cell phone holder today on the advise from another member. Nice set up and they give you 2 magnets to attach to your phone or case. Supposed to let it sit for 24hrs after attaching it but seems really strong when dry fitting it.

I thought I saved the link to that mount but didn't. Model and manufacture please. Thanks.

Sponsored

 

[AzScorpion]

So turns out I just couldnt wait for the weekend to install the lights.

Looks great! When I got mine it was still 108+ here and like you I couldn't wait to install them. Good thing it's a quick easy install.

 

[AzScorpion]

I thought I saved the link to that mount but didn't. Model and manufacture please. Thanks.

https://www.amazon.com/gp/product/B07Q9L47H7/ref=ppx_yo_dt_b_asin_title_o02_s01?ie=UTF8&psc=1

Now that I've been able to use this the past few days I can say I really like this holder. Every vent holder mount I've tried always tilts or eventually falls off if you have a larger phone. This one that actually holds the phone in place and doesn't slide off while you're driving.

 

[HenryMac]

Received the title for our truck today. Sweet!

 

[Rob Binsky]

Black Panther front seat covers in black. I originally had ordered a grey one, and for the driver’s seat only. After a few days, tho, I thought black would look better, and on both seats. Picture also shows my red trim cup hero holders, neoprene console cover, and husky floor mats.

 

[FULLSCALE]

My plastic DKM grille letters came in to match my tailgate ones! They are gloss black.

 

[Schafies]

https://www.amazon.com/gp/product/B07Q9L47H7/ref=ppx_yo_dt_b_asin_title_o02_s01?ie=UTF8&psc=1

Now that I've been able to use this the past few days I can say I really like this holder. Every vent holder mount I've tried always tilts or eventually falls off if you have a larger phone. This one that actually holds the phone in place and doesn't slide off while you're driving.

Great info. Thanks for the link.

 

[SandBaja]

Weather Tech mud flaps. Best part is...

 

[TheLoneRider]

Reese Hitch Step with aux back up LED’s

Unfortunately the wire harness was too short. They should add about a foot of length to it for better compatibility. Not a big deal though as I had wire and connectors on hand.

Since I had to lengthen it anyway, I went ahead and improved on the design.

I spliced the additional wire in on the wire harness end and on the step end I used bullet connectors so I can just disconnect the three wires at the hitch if I need to take the hitch off. That leaves the wire harness as is. Otherwise anytime you wanted to remove your hitch you would have to get under the truck and disconnect it from the back of the plug.

And installation finished...

LEDs work fine for backup. There is a switch under the step that is supposed to be able to be switched on for additional light with ignition in accessory position, that doesn’t seem to work. I get nothing in that switch position with ignition on or even with lights on. Not sure where it taps off of the harness to pick up voltage, but not a big deal - my main desire was the step and the additional back up illumination.

 

[rooster]

Cupholder Hero set ... so many pieces

 

[Ranger Danger]

How many pages is that brochure?

The first Ford dealership I stopped at had one, and only one so I scooped it. Online link below, and 24 pages including cover.

https://www.ford.com/services/assets/Brochure?make=Ford&model=Ranger&year=2019

 

[TheLoneRider]

Today Amazon brought me the tailpipe cover someone else posted.

Pretty much all set now, got my plates, my decals, cover, hitch, and extender. Time for a wash and some glamour shots!

 

[395Runner]

Took a little bit, but my UCAs came in so its high time to get the new suspension on. Quality of everything is awesome. The bushings look like thick urethane and everything looks over-engineered.

These are getting paired up with some Fuel Tech 17s with General Grabber 285/70r17.

New stance in progress...updates to follow!

Total Chaos UCAs

Fox 2.0 Coils

 

[SN13]

Tailgate Letters

 

[Ron Heritage]

So does it have to be my mailbox for it to count? Picked these up today at my dealership after they were shipped to them.

Black platinum stainless steel taligate letters and molded front mud flaps.

Sponsored