hitch questions / recovery w.l.l. possible hot girls...

[9zero1790]

Theoretically, if you were able to install a proper rated recovery point on each frame rail, you could use a short static strap (tree strap) to construct a bridle, then pull on that. Or you could just pull on one of those rated recovery points.

yes i always prefer a bridle to divide up some stress. i carry two tree straps just for that.

Sponsored

 

[Glocker]

Maybe try finding some of the Tremor rear hooks for sale used?

 

[khyros]

You could also just mount your winch on the front, and then do a reverse winch if that's the needed direction, securing your rear point as a proper hitch shackle. You just need 3 snatch blocks, enough tree protectors for them, and probably a winch extension line. More details below.

 

[pbethel]

You could also just mount your winch on the front, and then do a reverse winch if that's the needed direction, securing your rear point as a proper hitch shackle. You just need 3 snatch blocks, enough tree protectors for them, and probably a winch extension line. More details below.

The re-direct snatch block with no scale hooked to it might have had the highest load of all.
Pulling on the center of a long line imparts a very large force. Rigging class was many years ago but we were taught to be very wary of shallow angles like that.

 

[9zero1790]

Maybe try finding some of the Tremor rear hooks for sale used?

ive heard they do not fit the trucks with the factory tow package

 

[9zero1790]

The re-direct snatch block with no scale hooked to it might have had the highest load of all.
Pulling on the center of a long line imparts a very large force. Rigging class was many years ago but we were taught to be very wary of shallow angles like that.

nice video!

Sponsored