What did you receive in the mail today for your Ranger?

[Glocker]

That's great to hear!

Got it installed last evening. Initial impressions are that it's a nice cover.

Need to do a bit of fine tuning to it today.

I started having issues with the clamps popping off. I ended up putting a lock-nut behind each clamp, on the bolt, and cranked the bolts in through the clamp and nut and they are sticking fine now.

Sponsored

 

[JeffWoodall]

A rock hard, 2 inch Stubby!

Welcome to the 2 inch club..walk with pride my man. It's all about what you do with it anyway.

 

[MXGOLF]

What does the organization look like on he inside, or is it just a single compartment?

There is a single compartment with a tool tray on the top short end of the boxes. I will take a picture and put it on this thread.

I just added in some more pictures of the interior of the boxes.

 

[Jbrubakerjr]

Compliments of @D Fresh, a set of LED fogs to replace the ones Ford deleted

now to get the time for the installation.

 

[NeilP]

Arm rest cover came in the mail today & UPS dropped on a PPE aluminum transmission pan.

 

[MXGOLF]

What does the organization look like on he inside, or is it just a single compartment?

Here is the inside of the boxes.

 

[RedDakooter05]

Just the bill from the bank.

 

[Doc]

Here is the inside of the boxes.

What is that blue whoopee cushion

 

[rang19ca]

Just received the auto insurance renewal.

 

[RedDakooter05]

Just received the auto insurance renewal.

Actually, I got that too, haha...


Damn.

 

[Jbrubakerjr]

Here is the inside of the boxes.

Awesome, Thanks!

 

[LB'sTremor]

WhooHoo got my rear folding headrests and installed them. A huge shoutout to @Jackpot Tremor for the correct PN#'s !!!

(Right) Headrest, Outer - Ford (FU5Z-78611A08-AC)
(Left) Headrest, Outer - Ford (FU5Z-78611A09-AC)

LB

 

[NeilP]

WhooHoo got my rear folding headrests and installed them. A huge shoutout to @Jackpot Tremor for the correct PN#'s !!!

(Right) Headrest, Outer - Ford (FU5Z-78611A08-AC)
(Left) Headrest, Outer - Ford (FU5Z-78611A09-AC)

LB

I am guessing the old ones just slide out & the new ones slide in? There are time that it would be nice to have an unobstructed view out the back window.

 

[LB'sTremor]

Well not exactly, you have to reuse your covers and cutout for the button if you want it to show. They are tight but fit perfect! It really opens up the rear view.
LB

 

[airline tech]

WhooHoo got my rear folding headrests and installed them. A huge shoutout to @Jackpot Tremor for the correct PN#'s !!!

(Right) Headrest, Outer - Ford (FU5Z-78611A08-AC)
(Left) Headrest, Outer - Ford (FU5Z-78611A09-AC)

LB

Looks good, I am wanting to do the same but was unclear about the cover itself, I did pull my cover off of my existing headrests to check if I had the headrest without the button, but the hole for it - as other members have reported - they added a dowel rod to it-to make it function as intended, - I have standard - non-Folding, no hole in foam, so getting the replacements like these is my only option - Thanks for the pics and part numbers. I have tries locating the part number for the covers themselves (with the buttonhole) but cannot locate it, but it should be easy enough just to slit a hole in the cover for the button.

Sponsored