Money Pit??

[Turborave]

This is definitely more complicated (and expensive) than it needs to be. "Exhaust pipe expander tools"? Who knew? I'll probably have it welded on when the time comes. Better "snug" than sorry! Thanks for this information!

I ended up using the black tip from Go Rhino... much better fit.

Go Rhino GRT3410B

Sponsored

 

[zhuskers1]

I ended up using the black tip from Go Rhino... much better fit.

Go Rhino GRT3410B

I used the same one - perfect Fit and looks great!!

 

[HTX1811]

ADD front bumper.
Warn Winch w/synthetic rope.
Factor 55 winch shackle.
D-rings.
Synthetic soft shackles.
Sling block.
5 Nitto Ridge Grapplers.
Matching spare OEM rim.
Bed mat.
Two LED bars.
Recovery kit.
Rear seat cover for dog.
Knock off weather tech floor mats.
SPD High flow cat downpipe.
SPD cat back exhaust.
Mountune intercooler.
Custom tune.
Hand held BDX tuner.
Hypertech speedo calibrator.

That's all I can think of off the top of my head.

 

[RangerAJS]

ADD front bumper.
Warn Winch w/synthetic rope.
Factor 55 winch shackle.
D-rings.
Synthetic soft shackles.
Sling block.
5 Nitto Ridge Grapplers.
Matching spare OEM rim.
Bed mat.
Two LED bars.
Recovery kit.
Rear seat cover for dog.
Knock off weather tech floor mats.
SPD High flow cat downpipe.
SPD cat back exhaust.
Mountune intercooler.
Custom tune.
Hand held BDX tuner.
Hypertech speedo calibrator.

That's all I can think of off the top of my head.

That makes me feel like a light weight! How many HP does the rear seat cover add? I’m looking at that next for my ?

 

[Frenchy]

Simce Forscan counts since I do not have any other Ford vehicle i spent about $3700 so far. That does not count snow tires and maintenance.

 

[HTX1811]

That makes me feel like a light weight! How many HP does the rear seat cover add? I’m looking at that next for my ?

At least 3.76329 HP at the wheel.
I forgot about FORScan assisted mods.

XLT instrument cluster.
Terrain Management switch.

 

[Palibouss]

FP Fox 2.0

Duel borla exhaust

17’s w/ BFG 285

raptor grill

K&N cai

Afe charge pipes

Afe catted downpipe

Levels Performance intercooler

Pedal commander

Rigid fog lights

2 rigid 10in light bars for sports bar

2 rigid d series a pillar

Switch pros ford ranger kit

Go rhino Sports bar 2.0

Bora spacers

Gloss black handles, B pillar, mirror caps, vents, oblique, tailgate letters, fenders & grill

Custom tune from Dardentuned

Weathertech mats

Afn bumber, hooks & fairlead in route

 

[OrangeStreak]

I ended up using the black tip from Go Rhino... much better fit.

Go Rhino GRT3410B

I am considering this tip:
1. Did you get the 10" or 14" length?
2. Is your tip long enough that the place where the clamp attaches to the tailpipe does not show easily?
3. Is the fit of the tip on the tailpipe more snug or more loose when you 1st slide it on before securing it to the tailpipe?
4. Did you install the end of the tip flush with the body or out beyond the body? If beyond the body, how many inches out from the body?
Thanks,
Paul

 

[OrangeStreak]

I used the same one - perfect Fit and looks great!!

I am considering this tip:
1. Did you get the 10" or 14" length?
2. Is your tip long enough that the place where the clamp attaches to the tailpipe does not show easily?
3. Is the fit of the tip on the tailpipe more snug or more loose when you 1st slide it on before securing it to the tailpipe?
4. Did you install the end of the tip flush with the body or out beyond the body? If beyond the body, how many inches out from the body?
Thanks,
Paul

 

[Turborave]

I am considering this tip:
1. Did you get the 10" or 14" length?
2. Is your tip long enough that the place where the clamp attaches to the tailpipe does not show easily?
3. Is the fit of the tip on the tailpipe more snug or more loose when you 1st slide it on before securing it to the tailpipe?
4. Did you install the end of the tip flush with the body or out beyond the body? If beyond the body, how many inches out from the body?
Thanks,
Paul

i got the 10" (teehee)

its more loose, you can wiggle it, put some wd40 on the threads of the clamp screw, it will tighten much easier.

pics attached to address 2 and 4.

pardon the winteryness of the pipe.. we have had a lot of winter weather here.

 

[Doc]

i got the 10" (teehee)

its more loose, you can wiggle it, put some wd40 on the threads of the clamp screw, it will tighten much easier.

pics attached to address 2 and 4.

pardon the winteryness of the pipe.. we have had a lot of winter weather here.

 

[OrangeStreak]

i got the 10" (teehee)

its more loose, you can wiggle it, put some wd40 on the threads of the clamp screw, it will tighten much easier.

pics attached to address 2 and 4.

pardon the winteryness of the pipe.. we have had a lot of winter weather here.

Calvin,
Thanks for responding and for the great photos!
1. Even though the tip has weathered conditions on it, will it still clean up and look similar new?
2. It looks like from the rear view, the tip covers the tail pipe to the inside of your rear tire. Would you recommend the 14" to give a little more coverage over the tailpipe?
Paul

 

[Turborave]

Calvin,
Thanks for responding and for the great photos!
1. Even though the tip has weathered conditions on it, will it still clean up and look similar new?
2. It looks like from the rear view, the tip covers the tail pipe to the inside of your rear tire. Would you recommend the 14" to give a little more coverage over the tailpipe?
Paul

yes, it just has salty crap on it, it cleans up to a nice matte black.

i think the 14" is a bigger outlet diameter.. this is a 3" inlet, 4" outlet.. i wouldn't want much bigger than that. Some people paint the pipe with high temp matte black paint from the muffler back to conceal the look of it being a tip, i may do that in the spring.

 

[Turborave]

the 14" inlet diameter is 2.75, thats too small. i think the 10" is your only option, our pipe is 2.9ish"

 

[OrangeStreak]

yes, it just has salty crap on it, it cleans up to a nice matte black.

i think the 14" is a bigger outlet diameter.. this is a 3" inlet, 4" outlet.. i wouldn't want much bigger than that. Some people paint the pipe with high temp matte black paint from the muffler back to conceal the look of it being a tip, i may do that in the spring.

Thanks for the input

Sponsored