What did you do to your Ranger today?

[P. A. Schilke]

I used this guys specs and it fit perfect. https://www.instructables.com/id/Truckbed-Bike-Rack/
Then all I did was spray it with some bedliner spray. Thank you guys for all of the stuff you share!

Hi Brad,

Well done!

Best,
Phil Schilke
Ranger Vehicle Engineering
Ford Motor Co. Retired

Sponsored

 

[pa-fatboy]

for the millionth time, I master reset the Sync3
i dont think it fixed anything again

I had the inevitable black screen of death on my sync 3 display screen in my Ranger. When I turned the truck on, the screen was dead. I drove around doing various things like stopping, opening and shutting the door and turning it on again. I couldn’t remember the rights steps to reset Sync so I drove home and went to bed. Always a good choice,

in the morning, the black screen of death was gone.

 

[fusseli]

Put on Ford Accessories (by Putco) black chrome lettering. This is the first peel and stick I have ever put on one of my vehicles. I think it looks great and should have been part of the Sport accent package already!

 

[HighCaliberMitch]

I loaded about 1200 lbs in the bed to build a shed.

I have a 2.5" level, and it got loose in the front on 90 degree turns.

 

[HighCaliberMitch]

SCab or SCrew ?

Super crew

 

[Rigwright]

I loaded about 1200 lbs in the bed to build a shed.

I have a 2.5" level, and it got loose in the front on 90 degree turns.

Keep as much of the load as you can in front of the rear axle. I'm going with a removable rack on mine for longer stuff and/or using a trailer. This is my 5th Ranger I've had as a personal truck, and I've hauled ridiculous loads in them. LOL
I did heavy rigging and set machinery for a few decades, so I had bigger trucks for work. But I worked my Rangers like dogs at home. The '89 was my first Ranger, and that was at least a ton of topsoil. A heaping yard, and not dry. 60 psi in the rear tires. ?

 

[Deltasix109]

I made it haul a lot of wet mulch. Like, a lot.

 

[HighCaliberMitch]

Keep as much of the load as you can in front of the rear axle. I'm going with a removable rack on mine for longer stuff and/or using a trailer. This is my 5th Ranger I've had as a personal truck, and I've hauled ridiculous loads in them. LOL
I did heavy rigging and set machinery for a few decades, so I had bigger trucks for work. But I worked my Rangers like dogs at home. The '89 was my first Ranger, and that was at least a ton of topsoil. A heaping yard, and not dry. 60 psi in the rear tires. ?

It was 60 2x4s, 7 T1-11 4x8 and 3 shingle packs.

 

[Jbroke]

Finally got my plate, goes perfect with the blue truck

 

[lawrench]

Put on Ford Accessories (by Putco) black chrome lettering. This is the first peel and stick I have ever put on one of my vehicles. I think it looks great and should have been part of the Sport accent package already!

I put that on my Lightning Blue. I agree, should be part of the "Sports Appearance Package". I also think that the Blue Oval should have been changed to the black out or at least magnetic colors.

 

[The Box]

I did some peeling and sticking as well...

 

[ch47dmechanic]

Got the engine cover installed...

 

[Glocker]

Got the engine cover installed...

Any difference in engine noise?

 

[ch47dmechanic]

Any difference in engine noise?

I honestly forgot to check. I just had to the tunes cranked up on the way home as I usually do.

 

[Glocker]

I honestly forgot to check. I just had to the tunes cranked up on the way home as I usually do.

Report back if you think about it! LOL

Sponsored