Stedi Light Bar and Switch Panel

[emkeiz]

Every time I get the bottom hooked in and snap the top in, the bottom comes out. There aren't a lot of options here. I wonder if the Lariat trim is slightly different?

Possibly, i know i had to try a couple times, don't be afraid to push it in all the way. It seems like you really have to push it in hard

Sponsored

 

[DrizzyDrake]

I haven't tried yet. I wanna wire it up first

 

[RangerTaz]

I have the Lightforce switch fascia, but have the Stedi ST4K 42” light bar on my roof rack (see https://www.ranger5g.com/forum/threads/what-did-you-do-with-your-ranger-today.8810/post-202380). Even with shipping from Aus, these lights are such great value and quality, although the Aussie $ has improved a bit since last year. Seriously considering adding a couple of 8.5” Type-X Sport driving lights.

 

[TN_cactus]

Check this out!

Wanted to share because it can be sketchy buying stuff meant for overseas rangers in hopes they'll fit a US model

I wanted some extra lighting on my truck because I live in a super dark area with no street lights. I toyed with the idea of A-pillar lights but I had them on my jeep and didnt like how they reflected off the hood and they don't help much in snow storms. I did some searching and found Stedi, an Australian light company. I did some researching and was pretty confident that everything would work in the US Ranger, so I bought their Ranger Raptor Inner Grill Mount, ST3K 21.5" LED slim Light Bar, and Switch Panel for the Ford Ranger MK2, MK3, Raptor an Everest.

https://www.stedi.com.au/

Everything Fit great. The switch panel literally just pops into place - probably the easiest install I've ever done. The grill mounts work perfectly in the Stage3 Raptor Grill, provided I drilled some easy holes. It's super sturdy despite the stigma surrounding grill lightbar mounts. The wiring harness worked well too - but instead of using the provided headlight tie in, I tied into a fuse to get keyed power. Here's some pics! Definitely need a whiter headlight bulb now.

Enjoy!

Nice, I just purchased the Stedi panel as well. What bumper are you running?

 

[Msfitoy]

Check this out!

Wanted to share because it can be sketchy buying stuff meant for overseas rangers in hopes they'll fit a US model

I wanted some extra lighting on my truck because I live in a super dark area with no street lights. I toyed with the idea of A-pillar lights but I had them on my jeep and didnt like how they reflected off the hood and they don't help much in snow storms. I did some searching and found Stedi, an Australian light company. I did some researching and was pretty confident that everything would work in the US Ranger, so I bought their Ranger Raptor Inner Grill Mount, ST3K 21.5" LED slim Light Bar, and Switch Panel for the Ford Ranger MK2, MK3, Raptor an Everest.

https://www.stedi.com.au/

Everything Fit great. The switch panel literally just pops into place - probably the easiest install I've ever done. The grill mounts work perfectly in the Stage3 Raptor Grill, provided I drilled some easy holes. It's super sturdy despite the stigma surrounding grill lightbar mounts. The wiring harness worked well too - but instead of using the provided headlight tie in, I tied into a fuse to get keyed power. Here's some pics! Definitely need a whiter headlight bulb now.

Enjoy!

Very nice...how do you like the Shrock winch bar? Been looking at that for a long time...

 

[Frenchy]

Check this out!

Wanted to share because it can be sketchy buying stuff meant for overseas rangers in hopes they'll fit a US model

I wanted some extra lighting on my truck because I live in a super dark area with no street lights. I toyed with the idea of A-pillar lights but I had them on my jeep and didnt like how they reflected off the hood and they don't help much in snow storms. I did some searching and found Stedi, an Australian light company. I did some researching and was pretty confident that everything would work in the US Ranger, so I bought their Ranger Raptor Inner Grill Mount, ST3K 21.5" LED slim Light Bar, and Switch Panel for the Ford Ranger MK2, MK3, Raptor an Everest.

https://www.stedi.com.au/

Everything Fit great. The switch panel literally just pops into place - probably the easiest install I've ever done. The grill mounts work perfectly in the Stage3 Raptor Grill, provided I drilled some easy holes. It's super sturdy despite the stigma surrounding grill lightbar mounts. The wiring harness worked well too - but instead of using the provided headlight tie in, I tied into a fuse to get keyed power. Here's some pics! Definitely need a whiter headlight bulb now.

Enjoy!

how is the light on the road at night? That is the important question here!! Yes it look nice on the truck but I feel.tfeel.the road light output is a bit more important.

 

[CHIEF]

I am considering this light bar as well. Stedi along with LazerLamps are top notch choices when it comes to light bars.
However I am a little worried about the lightbar cutting the airflow to the cooling system.

Any thoughts?

Sponsored