Rostra Multi Camera Interface Installed

[Bludrok]

I made a video overviewing the Rostra multi camera interface. I should have stated that it supports 5 cameras in addition to the factory back up camera.

Another user used a switcher to have even more cameras, which is a great idea.

Sponsored

 

[RAYJAY]

what camera's did you use for the mirrors and front ??

 

[Bludrok]

I used these Nakita Cameras everywhere.

Here is a guide for installing side view cameras.

It's all on my build thread.

 

[Hack_Actual]

Excellent video, my dude. Thank you.

 

[micl9]

Wish I had seen this when I installed Lariat mirrors. Could have run all the wires at the same time.
Jason I see that you could use the back up camera as one of the inputs , right? Do you still have the normal function in reverse?
A question for the front, is it possible to use the lane keeping camera as an input? Not sure what that camera image even looks like

 

[Bludrok]

Wish I had seen this when I installed Lariat mirrors. Could have run all the wires at the same time.
Jason I see that you could use the back up camera as one of the inputs , right? Do you still have the normal function in reverse?
A question for the front, is it possible to use the lane keeping camera as an input? Not sure what that camera image even looks like

There is a setting in the software to use either the rear input on the rostra input on the rostra or the OEM rear camera. I don't have anything hooked into the rear camera input though, so I haven't played with it at all.

There is no way that I know of to use the lane keeping camera as a front camera. Personally I wouldn't want to anyway. keep in mind it has a calibration line that goes through the middle and even if you could it would require a lot of modification to get it to fit the RCA input of the rostra.

Sponsored