Lost bolts for side steps

[tivct]

Took off the side steps, want them back on for snow/slush/gunk in winter, but lost the bolts in a move last year. Can only find P/N for the whole assembly - can any of you check the bolts for a P/N, or guesstimate on thread pattern & length?

Thanks!

Sponsored

 

[P. A. Schilke]

Took off the side steps, want them back on for snow/slush/gunk in winter, but lost the bolts in a move last year. Can only find P/N for the whole assembly - can any of you check the bolts for a P/N, or guesstimate on thread pattern & length?

Thanks!

Hi Tivct,

I removed my steps to install Ford gap hiding aluminum. As I recall, the bolts are 6x1.00 and roughly 25mm long. It is the flippin' clips that are a bear to keep in place... I did the R&R myself and if you have another person to help it likely will go easier and faster...

Good luck.

 

[tivct]

Hi Tivct,

I removed my steps to install Ford gap hiding aluminum. As I recall, the bolts are 6x1.00 and roughly 25mm long. It is the flippin' clips that are a bear to keep in place... I did the R&R myself and if you have another person to help it likely will go easier and faster...

Good luck.

Thanks Phil - to clarify, those are the Tremor steps? I'm talking Tremor specifically... the rails are still bolted to the body, but I need the (16) bolts that hold the steps to the rails.

Guessing they're M10 something or other.

 

[P. A. Schilke]

Thanks Phil - to clarify, those are the Tremor steps? I'm talking Tremor specifically... the rails are still bolted to the body, but I need the (16) bolts that hold the steps to the rails.

Guessing they're M10 something or other.

Hi Tiivct,

Non Tremor 2019 lariat... but Duh on me. You are talking the fasteners that bolt the brackets to the body...not the bar to the brackets.... My error.... Sorry...IDK....

best,
Phil

Sponsored