Sponsored

Going to install rock lights, need ideas

OP
OP
RAYJAY

RAYJAY

Well-Known Member
First Name
Jeff
Joined
Aug 3, 2020
Threads
22
Messages
411
Reaction score
628
Location
UNION DALE PA
Vehicle(s)
2020 ranger pickup 2019 subaru
So buy a traffic advisory light bar that goes up in your rear window and plugs into the socket in the back.
will not help with doing a tire swap ..
Sponsored

 

Danager

Well-Known Member
First Name
Dan
Joined
Apr 3, 2021
Threads
12
Messages
1,067
Reaction score
3,876
Location
Alberta
Vehicle(s)
2019 Edge
Occupation
Manager
I am also running the Lux kit. Worth noting - I had to replace every light 2 years later. All the magnets failed and 5 of the 8 lights stopped working. It was covered under their 3 year warranty. See in the pics, the placement of these lights is of no use when replacing a tire.

I also started with planning for lighting/accessory wants and made a harness for that. That’s what is laying on the ground in the one pic. Separate leads (power and ground) for each circuit, pigtails for individual components. I pulled this through the frame rail on the passenger side. This protects it from the heat of the exhaust. That was easy to do until you get to the rear, a little tricky but doable. On the drivers side, I zip-tied it to the factory harness run along the top of the frame rail.

IMG_3841.jpeg
IMG_2983.jpeg
IMG_2988.webp
 

Whiplash

Well-Known Member
First Name
Kern
Joined
Oct 17, 2021
Threads
2
Messages
270
Reaction score
848
Location
The southwest Missouri Ozarks
Vehicle(s)
2021 Ranger XLT FX4 / 2004 Mazda RX8
Occupation
Retired
I am also running the Lux kit. Worth noting - I had to replace every light 2 years later. All the magnets failed and 5 of the 8 lights stopped working. It was covered under their 3 year warranty. See in the pics, the placement of these lights is of no use when replacing a tire.

I also started with planning for lighting/accessory wants and made a harness for that. That’s what is laying on the ground in the one pic. Separate leads (power and ground) for each circuit, pigtails for individual components. I pulled this through the frame rail on the passenger side. This protects it from the heat of the exhaust. That was easy to do until you get to the rear, a little tricky but doable. On the drivers side, I zip-tied it to the factory harness run along the top of the frame rail.

IMG_3841.jpeg
IMG_2983.jpeg
IMG_2988.webp
Looks like we used 2 completely different kits or you chopped yours up...No failures yet...
20221027_160939.webp
 

DukeCanBuildit

Well-Known Member
First Name
Duke
Joined
Jul 27, 2020
Threads
66
Messages
9,603
Reaction score
45,991
Location
Kitchener, Ontario
Vehicle(s)
2019 XLT SuperCab - FTW!
Occupation
Retired (P/T) Caregiver (F/T)
Vehicle Showcase
1
There is a phenomenon called "target fixation " or "driver fixation " which claims that something like a light or flashing light can cause you to drive right into it ? ...
It’s definitely a thing. In the Greater Toronto Area, the MTO has crash trucks that block accident or construction scenes and divert traffic around them to help keep people safe…

IMG_5836.webp


No matter how bold and bright the warnings are, people still drive into the back of them…

IMG_5837.jpeg


?‍♂
 

NotBudule

Well-Known Member
Joined
Mar 6, 2022
Threads
43
Messages
2,984
Reaction score
11,852
Location
WV
Vehicle(s)
XLT
It’s definitely a thing. In the Greater Toronto Area, the MTO has crash trucks that block accident or construction scenes and divert traffic around them to help keep people safe…

IMG_5836.jpeg


No matter how bold and bright the warnings are, people still drive into the back of them…

IMG_5837.jpeg


?‍♂

f9b15d57e3760dd7a86fab858ba836d5.gif


NEVER drive into the light !
Sponsored

 
 








Top