Genuine Ford Parts, Accessories & Ford Performance

[k_teven]

Hello.

I just took delivery on my new 2025 Ranger Raptor. I am ordering a custom topper for it but it is my understanding that it should have the Load Box Reinforcement Kit installed on it (SKU: VN1WZ2627726B) Everywhere I have asked has told me that it is out of stock. Can you provide any assistance in getting this for my truck? Any discount codes would be greatly appreciated also.

Thank you!

https://www.ford.com/product/load-box-reinforcement-kit-for-raptor-models-only-p2746486927

Sponsored

 

[Jason B]

Hello.

I just took delivery on my new 2025 Ranger Raptor. I am ordering a custom topper for it but it is my understanding that it should have the Load Box Reinforcement Kit installed on it (SKU: VN1WZ2627726B) Everywhere I have asked has told me that it is out of stock. Can you provide any assistance in getting this for my truck? Any discount codes would be greatly appreciated also.

Thank you!

https://www.ford.com/product/load-box-reinforcement-kit-for-raptor-models-only-p2746486927

Trucks built after Sep 19 '24 don't need them. The bed was redesigned with load box reinforcements. Check the 6G Ranger forum:

(9) J-Braces | Page 2 | Ranger6G - 2024+ Ranger & Raptor Forum, News, Owners, Community (6th Gen)

"As of Jan 2025, Ford site includes a reference date for vehicles requiring the J-brace. Below copied directly from the Ford web site:

Ford Ranger 2024-2025
-- Required when installing accessories extending above the load box side rail and weighing more than 88lb (40kg)
-- Required for vehicles built before 9/19/24 "

 

[k_teven]

Trucks built after Sep 19 '24 don't need them. The bed was redesigned with load box reinforcements. Check the 6G Ranger forum:

(9) J-Braces | Page 2 | Ranger6G - 2024+ Ranger & Raptor Forum, News, Owners, Community (6th Gen)

"As of Jan 2025, Ford site includes a reference date for vehicles requiring the J-brace. Below copied directly from the Ford web site:

Ford Ranger 2024-2025
-- Required when installing accessories extending above the load box side rail and weighing more than 88lb (40kg)
-- Required for vehicles built before 9/19/24 "

Good to know! Thank you very much. My truck was built in March 25.

 

[LevittownFordParts.com]

Hello.

I just took delivery on my new 2025 Ranger Raptor. I am ordering a custom topper for it but it is my understanding that it should have the Load Box Reinforcement Kit installed on it (SKU: VN1WZ2627726B) Everywhere I have asked has told me that it is out of stock. Can you provide any assistance in getting this for my truck? Any discount codes would be greatly appreciated also.

Thank you!

https://www.ford.com/product/load-box-reinforcement-kit-for-raptor-models-only-p2746486927

Hi,
What Jason said is correct.

If you have any other questions let us know!

- Benny

 

[k_teven]

Hi,
What Jason said is correct.

If you have any other questions let us know!

- Benny

Thank you!

 

[trmkars]

Hello Benny, I am looking for a intermediate steering shaft. The page recomends to also replace bolt(s) with new at the same time. I am not seeing the bolt. Can you help me find the correct bolt?

Additionally -- if possible are you still sending out any discount codes? With or without the discount - I will still place the order with you. You have helped me and many others here in the past!

Intermediate Shaft - Ford (KB3Z-3B676-B)
2020 Ford Ranger XLT 4x4

Thanks in advance!





Here's a link to the part:


https://parts.levittownfordparts.co...9cmFuZ2VyJnk9MjAyMCZ0PXhsdCZlPTItM2wtbDQtZ2Fz

 

[LevittownFordParts.com]

Hi Tyson,
I sent you a code you can use. If you would like me to verify the shaft # please send me your VIN. The bolts used throughout are https://parts.levittownfordparts.com/oem-parts/ford-upper-shaft-bolt-w714409s439

These are sold individually.

- Benny

 

[trmkars]

Hi Tyson,
I sent you a code you can use. If you would like me to verify the shaft # please send me your VIN. The bolts used throughout are https://parts.levittownfordparts.com/oem-parts/ford-upper-shaft-bolt-w714409s439

These are sold individually.

- Benny

Most excellent! I will send my vin tonight! Thank you!

 

[Stevo56]

Hi, Benny, I am looking at buying splash guards for my 2023 Edge SEL, part numbers FT4Z-16A550-AA and KT4Z-16A550-AA.

Could I get a code for this.

Thanks.

 

[LevittownFordParts.com]

Hi Steve,

Message sent

Thanks!
- Benny

 

[harrisonl2088]

Hey so I have a 2020 xlt 3.2 ranger and I brought it with an after market aluminium tray and I have brought the universal camera kit and I was wondering where the harness plugs into

 

[airline tech]

Hey so I have a 2020 xlt 3.2 ranger and I brought it with an after market aluminium tray and I have brought the universal camera kit and I was wondering where the harness plugs into

I am assuming you are talking about this:

And want to mount a Dash Cam - Here

You have (2) options for tapping power.
1. Fuse Tap the BCM Fuse box
2. Tap power from behind the (Rear View Mirror) via the (Auto-Dimming) mirror connector requires Dongar harness adapter and possibly (Ford) harness as it depends on if you currently have the Auto-Dimming mirror, if not you will need the Ford Harness to bring power out to connect to the Dongar connector.

Referenced in various threads - Dash Cam Install, all the information you need is in these threads

 

[ControlNode]

I am assuming you are talking about this:

And want to mount a Dash Cam - Here

You have (2) options for tapping power.
1. Fuse Tap the BCM Fuse box
2. Tap power from behind the (Rear View Mirror) via the (Auto-Dimming) mirror connector requires Dongar harness adapter and possibly (Ford) harness as it depends on if you currently have the Auto-Dimming mirror, if not you will need the Ford Harness to bring power out to connect to the Dongar connector.

Referenced in various threads - Dash Cam Install, all the information you need is in these threads

I don't know if the Australian XLT Ranger has the auto-dimming mirror. But, the camera's install documentation should cover the power requirements, just need to find there your truck can safely provide that. If you don't know, may be best to have an audio install shop so the wiring for you.

 

[k_teven]

Hi, Benny, I am looking at buying splash guards for my 2023 Edge SEL, part numbers FT4Z-16A550-AA and KT4Z-16A550-AA.

Could I get a code for this.

Thanks.

Definitely not knocking Ford parts here, however, I bought and installed the WeatherTech no-drill mudflaps on both my 2022 Ranger and on my 2025 Raptor. They are GREAT! Goes on in about 45 minutes tops.

 

[Stevo56]

Definitely not knocking Ford parts here, however, I bought and installed the WeatherTech no-drill mudflaps on both my 2022 Ranger and on my 2025 Raptor. They are GREAT! Goes on in about 45 minutes tops.

Looked at them. Ford parts are $50 cheaper.

Sponsored