Sponsored

Fog light adjustment?

apotocki

Well-Known Member
First Name
Alan
Joined
Dec 10, 2019
Threads
19
Messages
271
Reaction score
657
Location
Rochester Hills, Michigan
Vehicle(s)
2019 Ranger XLT
Occupation
Network Force Analyst
Vehicle Showcase
1
Sorry if this exists somewhere but I tried searching and came up empty.
I recently installed new bulbs for my fogs. I noticed that my passenger side is aimed really low - much lower than the drivers side.
Is there an adjustment to raise and lower the fogs? If so, please provide more detail. Thought I’d ask before getting back under and removing the splash shield! Thanks! Much appreciated.
Sponsored

 
OP
OP
apotocki

apotocki

Well-Known Member
First Name
Alan
Joined
Dec 10, 2019
Threads
19
Messages
271
Reaction score
657
Location
Rochester Hills, Michigan
Vehicle(s)
2019 Ranger XLT
Occupation
Network Force Analyst
Vehicle Showcase
1
I'm unfamiliar if there is an adjustment.
But i would make sure the bulb is installed correctly first.
They are installed correctly. The truck is relatively new and I can’t confirm if the original bulbs were this way or not. If there is no adjustment I’ll probably install the old ones and see if theybare the same way. Thanks.
 
Last edited:

dguffin

Well-Known Member
First Name
Dana
Joined
Nov 4, 2018
Threads
0
Messages
117
Reaction score
120
Location
Aberdeen, SD
Vehicle(s)
20 Corsair, 19 Ranger, 12 Boss, 08 Zuma
Occupation
Shop Foreman
Vehicle Showcase
1
There is a wheel you turn on the back of each fog light for adjustment.
 

Rviator

Well-Known Member
First Name
Doug
Joined
Apr 30, 2019
Threads
20
Messages
445
Reaction score
870
Location
FLA
Vehicle(s)
A 2019 Ford Ranger of course, and a 2015 Yamaha YZF-R3
Occupation
retired aerospace engineer
Vehicle Showcase
1
Yes the adjuster wheel looks like a small gear. Crawl under the truck and look up. Mine were aimed too low.
 


OP
OP
apotocki

apotocki

Well-Known Member
First Name
Alan
Joined
Dec 10, 2019
Threads
19
Messages
271
Reaction score
657
Location
Rochester Hills, Michigan
Vehicle(s)
2019 Ranger XLT
Occupation
Network Force Analyst
Vehicle Showcase
1
Easy! Just pulled the skid plate and reached up. They must have been miss adjusted from the start. I got the truck in mid December and never paid attention to them until changing the bulbs. The passenger side was a good 2 inches lower than the drivers side and both were pretty low. That’s interesting as I did a 2 inch level about a month ago so you would think they would have been high.
 
 








Top