Confirming fit

[DangerRanger19]

19 xlt fx4 super crew. Just ordered the tuff country 3 inch lift which is 3 inch front 1 inch rear. Wanting to verify that 17x9 +25 will fit mounted on the stock lt265 65 17 tire and be rub free with no other mods?

Sponsored

 

[Hardy12000]

Your going to be putting alot of stress on your suspension system with no further mods.

 

[DangerRanger19]

Your going to be putting alot of stress on your suspension system with no further mods.

How so?

 

[Hardy12000]

How so?

Any kit that uses a spacer to level the front end is increasing the gap between the UCA and coil sping and puts stress on the CV and ball joints. The only way around that is a full suspension lift. Leveling kits within a reasonable size though can be used without putting too much stress on the CV/Ball, but they all add some, and 3 inches is pretty high from stock.

 

[DangerRanger19]

Any kit that uses a spacer to level the front end is increasing the gap between the UCA and coil sping and puts stress on the CV and ball joints. The only way around that is a full suspension lift. Leveling kits within a reasonable size though can be used without putting too much stress on the CV/Ball, but they all add some, and 3 inches is pretty high from stock.

Understood but mainly looking for confirmation that the wheel/tire combo are trouble free.

Sponsored