2019-2022 Ranger Ford Performance Off-Road Bumper M-17757-R1F

[Highsider]

Bret: What size hole saw was used? I see you dont have a front plate. Any info on what Ford says about plate location on the front?

Were the holes for the sensors there? The instructions have pictures of the bumper with sensor locations in exactly the same place as your pictures?

Any clocking of the winch?

Sponsored

 

[Brett Fields]

What size hole saw was used?

- Matt from Brass Knuckle Automotive (link in my signature) used the largest bit he had and finished it out with a die grinder. The bumper is pretty substantial. If you're gonna use a hole saw, have a few on hand. I wanna say 1 1/8, but don't quote me. You can google it. its out there.​

I see you dont have a front plate. Any info on what Ford says about plate location on the front?

- I do have a front plate, I just took it off for that day. It covers the fairlead.​

Were the holes for the sensors there? The instructions have pictures of the bumper with sensor locations in exactly the same place as your pictures?

- No holes for sensors. But those pics are what gave me the courage to proceed with the project. Ford shows you the pics, but then say "Not compatible" in the fine print.​

Any clocking of the winch?

- Sorry, I've not heard the term "Clocking". If that refers to rotating winch components so that the clutch lever is in a more appropriate position, then yes, my installer did that. Also, you need to relocate the winch electronics as you see on my truck. I'm not sure, but I thought I overheard him saying that the bumper was predrilled for it.​

I hope this helps,

Brett

 

[Highsider]

Thanks for the info!

 

[TJC]

So where can I find a picture of a ranger wearing this bumper? Nevermind!

 

[Brett Fields]

So where can I find a picture of a ranger wearing this bumper? Nevermind!

Huh???

 

[RangerDanger617]

Is this product truly incompatible with the 2023 model?

 

[Brett Fields]

Is this product truly incompatible with the 2023 model?

2023 is the same body style, right? It's the 2024 that becomes wider.
...or am I missing something?

 

[Stage3Motorsports]

Is this product truly incompatible with the 2023 model?

As stated about 23 is the same body style and should have the same fitment, per the FP website 19-23 is listed as fitment.

https://www.performanceparts.ford.com/part/M-17757-R1F

 

[RangerDanger617]

2023 is the same body style, right? It's the 2024 that becomes wider.
...or am I missing something?

That's what I figured. Most sites that had it must have. had bad info. They kept listing it as 2019-2021 compatible.

Sponsored