Alpha Rex headlights

[D Fresh]

As for the startup sequence? Yeah it is goofy but mess with Forscan and hookup the DRL module and you done have to worry about the startup as much

Between module setup and Forscan is it possible to do without the start up sequence yet have the DRL function as normal?

For the price they are absolutely insane. They shit all over the factory lights and outperform the Lariat lights as well

Would really like to see a pic of the LUXXs from further back.

The cutoff looks identical to the Lariat's, down to the upward dogleg moving right.

But the width, from what I've seen does look better on the Alpha Rex's.

If I could make money upgrading my Lariat lights that'd be pretty cool.

Sponsored

 

[Frenchy]

Between module setup and Forscan is it possible to do without the start up sequence yet have the DRL function as normal?


Would really like to see a pic of the LUXXs from further back.

The cutoff looks identical to the Lariat's, down to the upward dogleg moving right.

But the width, from what I've seen does look better on the Alpha Rex's.

If I could make money upgrading my Lariat lights that'd be pretty cool.

If you are talking about the silly startup sequence the only way to not have it is get the pro headlights.

 

[D Fresh]

If you are talking about the silly startup sequence the only way to not have it is get the pro headlights.

Yeah the startup sequence is a no-go for me. The Luxxs would have to be twice as good as the Lariat lights for me to put up with that garbage.

 

[Synyster06Gates]

Yeah the startup sequence is a no-go for me. The Luxxs would have to be twice as good as the Lariat lights for me to put up with that garbage.

PRO for the win! Proud probably be able to pocket about $500 after the swap.

 

[Frenchy]

Yeah the startup sequence is a no-go for me. The Luxxs would have to be twice as good as the Lariat lights for me to put up with that garbage.

I have yet to do a side by side comparison but when I do I will let you know

 

[D Fresh]

PRO for the win! Proud probably be able to pocket about $500 after the swap.

Possibly. I'll have to keep my eyes on this thread.

 

[Synyster06Gates]

Possibly. I'll have to keep my eyes on this thread.

For what it's worth, here's the only animation on the PRO. Unlocked then locked.

https://youtube.com/shorts/vpElCYnUNWM?feature=share

 

[D Fresh]

For what it's worth, here's the only animation on the PRO. Unlocked then locked.

https://youtube.com/shorts/vpElCYnUNWM?feature=share

That I could live with.

 

[JBro]

Well got my Pros ( halogen projectors ) installed last night. Huge job imo. Took me 4 hours. With a 3-inch level hit, I had to dial the down the aim the headlight almost all the way down.

The grill removal is tricky. You don't push down on the tabs, you need to shove a tiny short screw driver in the tab to put down this clip, then the grill comes out.

Bumper torx screw removal is an absolute pain on the sides. There is very little room to fit a wrench up there to unscrew.

What bulbs did you go with? My PROs just arrived and am looking for some LEDs to drop in them.

 

[Frenchy]

What bulbs did you go with? My PROs just arrived and am looking for some LEDs to drop in them.

Before you drop some LED's in there perhaps get an on road performance picture with the halogen bulbs? No one has done this yet on the Pro series that i am aware of

 

[JBro]

Before you drop some LED's in there perhaps get an on road performance picture with the halogen bulbs? No one has done this yet on the Pro series that i am aware of

Yes! Thanks for that reminder. I will do that.

 

[theanswer3]

Before you drop some LED's in there perhaps get an on road performance picture with the halogen bulbs? No one has done this yet on the Pro series that i am aware of

It was done in the alpharex pro write up. Very thorough with pics provided.

 

[Frenchy]

p

It was done in the alpharex pro write up. Very thorough with pics provided.

Not with the halo bulbs in the Pro series assemblies.

 

[Synyster06Gates]

What bulbs did you go with? My PROs just arrived and am looking for some LEDs to drop in them.

I used Aukee 90w/16,000 lumen bulbs though on Amazon they appear to have been replaced with a higher output 110w version. The dimensions look the same.

https://www.amazon.com/dp/B07V3875F...abc_10MN4HX8E2HG1WRXMX4K?_encoding=UTF8&psc=1

 

[theanswer3]

I used Aukee 90w/16,000 lumen bulbs though on Amazon they appear to have been replaced with a higher output 110w version. The dimensions look the same.

https://www.amazon.com/dp/B07V3875F...abc_10MN4HX8E2HG1WRXMX4K?_encoding=UTF8&psc=1

Ok I just bought the 110 version. I'm glad I got the right ones.

Sponsored