Search results

New setup: 285/70/17 Falken Wildpeak A/T3W with Fuel Lethal 17/9 with the -12mm offset changing the tire circumference to 2500 and it's right on the money at 70 mph.

My electronic wastegate control actuator is still making that noise but now it's getting louder. Truck still runs great so it's still not worth going to Ford to only be told that nothing is wrong, go home. I guess I'll wait until it's so loud or when it actually fails. Has anyone had this...

Thank you for explaining that. So if you're not worried about automatic emergency braking for the trailer, no need to buy the Ford approved controller. Might as well buy the less expensive controller and just use the 4 wires. Ford really screwed up here. There should be no reason to have to...

Ok thanks. I'll spin through the screens again and look for the IVSU screen. I don't recall ever seeing that screen. BTW, is your truck a NA truck?

Mine still shows 1.1.7. I do not find any diag screen that will show installed packages. Can you please tell us which screen that is on?

The only suggestion I have is to get a new / different usb flash drive and download the files yourself, follow the instructions and try again. Just because your usb drive came from Ford, doesn't mean it for sure undamaged or even corrupt. Trying a different one and downloading the files...

If you are using the left side usb port (closest to the driver) in the dash and it does not detect the update, I would double check that you have created the flash drive correctly. Don't forget to unplug everything else so the other usb ports are empty. The first post in this thread has...

I used the left USB port in the dash center console. The right port would not detect it. Also the instructions say to have only the usb drive plugged in, so remove anything else from other ports.

Oh, that helps a lot. So perhaps my update did work, but it won't show the new map version until I update to Sync 3.4. So even though my naps show NA 117, I might have 118 or 119 I guess.

ok, thanks. I will try the update again. That's interesting that your map update didn't show until the next day. So do you have a NA truck and is your current version 3.3 19052? And your truck shows map NA 118 or were you able to get NA 119? Any idea when we get Sync 3.4 update?

not true. I have factory remote start and this auto folding mirror module installed and I've never had any issues with remote start. The only issue I'm aware of that some of us reported that sometimes a mirror may not unfold. A quick push of the button and it will unfold. That said, we saw...

I tried to update my maps yesterday to no avail. I was able to download the files and it went through the steps, prompts as shown here. I even got the last message that says update complete, remove usb drive. That said, I still show NA 117 maps. I show 1.1.1.1332 for Gracenote. I cannot see...

Great thread, but is confusing as I read through the pages. I have read in other threads where people claim there are no wires for the brake controller. Meanwhile in this thread, it is clear that many of you have found the 4 wires. That said, it looks like some people are finding a solid blue...

The best place to hear the chrip is to put your head right over the front right tire and look at the part moving back and forth. See the first post of this thread. When you watch it move, you'll know if it's making any noise or not.

I haven't sprayed mine and it still makes the sound every time I start the truck. While it's under warranty, I don't care. Once warranty is close to running out, I'll take it to another dealer. Other than the noise from this, I don't experience any performance issues. My trucks runs great.

I used this kit and did not change out the lowers. No binding or any other issues so far. That said, I only have about 150 miles on the truck since I completed the job.

I changed the mm too, the speedo is perfect. For others to reference, here is what I tried: My new setup is 285/70/17 Falken Wildpeak AT3W, the factory mm setting was 2360 and the speedo was reading slow by 4 or 5 mph. That is not good because you are going faster than you think. I tried...

Thanks for your post. There for sure seems to be two options, BCM change or the mm change, and it seems people are reporting that both work. Did you also have 285/70/17 tires and did you use 2610 mm?

I received my Ford Ranger LIfts 3 inch level kit yesterday. It's a great kit and easy instructions. I highly recommend this kit and customer service is super! New wheels/tires are 285/70/17 Falken Wildpeak A/T3W with Fuel Lethal 17/9 with the -12mm offset I had to remove the crash bars and...

Hello everyone - I see this thread seems to be a little old and the recommended solution to fix the speedo after changing the tires has also changed. I would like to confirm what FORScan changes need to be made for my setup. I have a 4wd 2019 Ranger Lariat. Stock wheels and tires were...