Sponsored

Search results

  1. Redarc Tow Pro Elite Install

    That is who I purchased both of kits from. As I posted earier (244), I have a brand new that has never been installed, still in the box. PM me and I'll make somebody a great deal.
  2. My 2019 ranger jerks when putting into drive

    That fixed my truck. Goes into gear fine now. Valve body was the main issue for me. FYI - If you did any Forscan changes in the BDY, those will be reset back to As-Built after they re-flash. I had to go back and do the double honk, DRL, tire size for speedo, and bambi mods.
  3. FORScan Crowdsourced Wiki

    Allowed DRL Options did the trick. I was able to confirm the front and side lights turn on when in Drive. My 3 front grill lights are also on. I will need to confirm, but I didn't see the rear lights on at all. It was a bright day so I'll check them again. Rears lights should be on, right...
  4. My 2019 ranger jerks when putting into drive

    Thank you for your post. ? Can you tell us exactly where it is located? The manual says on page 254 that you need to take it to an authorized dealer to check the fluid level or for anything else that has to do with the trans. Is that bs, meaning we can at least check the level ourselves? I...
  5. Dashcam Install

    I tried to get mine off to no avail. I thought for sure i would going to brake something. I'm still looking at the cord going down to the power port :( I recently got a chip in my windshield and will need to have that repaired. I was going to ask the tech if he had to remove one of these to...
  6. My 2019 ranger jerks when putting into drive

    Oh, I forgot to mention that none of the Ford dealerships around Dallas have the necessary adaptor for a trans flush via their quick lane. There is no trans dip stick, as it was not intended for consumer to need to check trans fluid level, per a Ford manager I spoke to. You have to have a Ford...
  7. FORScan Crowdsourced Wiki

    Ok, got it. I will go back into FORScan and check. I found the dash menu settings, it's under Lighting and defaults to On or box checked.
  8. FORScan Crowdsourced Wiki

    I don't see the Allowed DRL Options in the list, look at my screenshot. Are you sure that is how it's listed? I'll go back and double check. I didn't have to change anything in the dash menus before, and I don't recall seeing that as an option. Again, will go check. Mine is a 2019, so...
  9. My 2019 ranger jerks when putting into drive

    Update for y'all. I had Ford look at my truck to see why it was shifting hard into Drive. They had my truck for 3 weeks! They said that TSB 19-2052 did not apply to my truck. It turned out that they needed to replace the trans control valve, and then they had to reprogram my PCM to...
  10. FORScan Crowdsourced Wiki

    Hey friends, I'm having a issue with DRL on my 2019 Lariat. I upgraded to the latest ForScan v2.3.49. Background: I performed 5 or 6 ForScan changes back in 2019 when I got my truck. Double honk, bambi, DRL, etc. A couple of weeks ago Ford had to replace my transmission valve body because...
  11. My 2019 ranger jerks when putting into drive

    Thank you for your reply. I'll have Ford change the trans fluid while they are checking for the TSB stuff. I wish our trucks had a dam trans dip stick :mad:
  12. My 2019 ranger jerks when putting into drive

    Zero :sunglasses:. Now that I have a one hour commute, miles will pile up quick.
  13. My 2019 ranger jerks when putting into drive

    Thanks, another possible fix. I too would like to know if I can update the programming for the TCM myself and how to do it.
  14. My 2019 ranger jerks when putting into drive

    Thank you for this information. I will take it to Ford and have them check for the TSB reflash fix. It is weird with no real pattern. Most of the time, it works fine. When going from N to D, it sometimes will jerk or jump forward, and then drive fine. It shifts with normal driving between...
  15. My 2019 ranger jerks when putting into drive

    Hi Sid! I hope you are doing well my friend :) ....a mystery until the end of time LOL Thanks for your reply. My commute was only 1 mile at that time, and then that stupid's covid crap I had to work from home. I only have 21k so mine is like new, but without the warranty. I drive it...
  16. My 2019 ranger jerks when putting into drive

    My truck shifts between gears fine. I only have the issue when at a full stop and I shift from N to D or from R to D. The truck will jump aggressively and then drive just fine. I had Ford change the trans oil over a year ago and this shifting issue only started a few months ago, and seems to...
  17. My 2019 ranger jerks when putting into drive

    Hey friends - so recently I noticed that when I put my truck into Drive, the truck jumps forward in a jerky manner. I didn't do that before and I know I have seen others post similar issues. I had Ford change my trans oil, and there is no way for me to check the level. Does anyone have more...
  18. Redarc Tow Pro Elite Install

    I have a brand new controller if anyone wants to buy it at a discount. My first order was lost and with my trip quickly approaching, I purchased a 2nd one and had it shipped overnight. Of course the first one showed up the next day, thus now I have two. The only thing missing is the grey wire...
  19. Redarc Tow Pro Elite Install

    I did. Mine is a 2019 and the day before we were to leave for our trip, I installed the controller. The connectors worked on one end, but not the other. I wasn't able to get the wires to stay in and the grey connectors broke when I pushed too hard. I was pissed so I cut off the factor...
  20. Go Rhino - Black Exhaust Tip

    I put mine on in 2019, still looks new





Top