KJRR
Well-Known Member
- First Name
- KJ
- Joined
- Feb 1, 2020
- Threads
- 13
- Messages
- 1,741
- Reaction score
- 8,669
- Location
- Cleveland, OH
- Vehicle(s)
- '19 Ford Ranger, '14 Ford Edge, '74 VW Type 181
- Occupation
- Professional Curmudgeon
- Thread starter
- #16
Details on the bed mat.
One of the issue I wanted to cure with the bed liner was the tendency for everything to slide around. Another was that its rough on the knees.
I looked at the Ford bed mat but it wouldn't fit with the liner in there. Looked at other mats like horse stall mats and those weigh a lot. Wanted something to remove if I wanted.
I found the puzzle mats and thought that might work. Cheap, provides cushioning and should reduce things sliding around. I was thinking I would get black but received Grey. Goes well with the silver on the truck.
Got the 2 pack since one more would be needed than was in the one pack. You could get away with the 1 pack if you don't mind a gap at the edges.
The edges are a little rough, I had a fresh blade and took my time cutting it but still came out rough.
Finished. I used the edges off a piece to finish the outside. Not perfect but I'm happy with it.
Added a bed light too. Nice and bright.
I can just reach it to turn it on or remove it.
One of the issue I wanted to cure with the bed liner was the tendency for everything to slide around. Another was that its rough on the knees.
I looked at the Ford bed mat but it wouldn't fit with the liner in there. Looked at other mats like horse stall mats and those weigh a lot. Wanted something to remove if I wanted.
I found the puzzle mats and thought that might work. Cheap, provides cushioning and should reduce things sliding around. I was thinking I would get black but received Grey. Goes well with the silver on the truck.
Got the 2 pack since one more would be needed than was in the one pack. You could get away with the 1 pack if you don't mind a gap at the edges.
The edges are a little rough, I had a fresh blade and took my time cutting it but still came out rough.
Finished. I used the edges off a piece to finish the outside. Not perfect but I'm happy with it.
I can just reach it to turn it on or remove it.
Sponsored