What did you do to your Ranger today?

[P. A. Schilke]

Those look good! I did the vinyl lettering on the front and the ABS on the back. I wanted the front to match the Saber color of my truck and couldn't find that color in the ABS.

Yep! I inquired about white...Nope...just black... I punted! spend my $ elsewhere, eh?

Best,
Phil Schilke
Ranger Vehicle Engineering
Ford Motor Co. Retired

Sponsored

 

[jhndeergrn]

Not that the Ranger needs more back up lighting, but I hooked up some old Rigid lights to my reverse lights.

 

[FULLSCALE]

I reinstalled my spare tire with the front facing down for easy access of the valve stem after swapping it out with a 265/70R17 Grabber ATX.

 

[FULLSCALE]

Not that the Ranger needs more back up lighting, but I hooked up some old Rigid lights to my reverse lights.

Those looks good! How did you wire them in?

 

[jhndeergrn]

The Rigid harness draws power from the battery and uses the trigger from the reverse lights, which I tied into from the center trailer harness. Took me an hour to lay everything out and tie into place.

 

[Montana Ranger]

I helped some fellow Red Cross volunteers move some shelter supplies. First time I've towed with my Ranger.

 

[BHunted]

Added a Rough Country curved single row light bar...

 

[Caluke]

I did my first oil change on the truck, along with a tire rotation at 5k miles. I also vinyl wrapped the lower bumper fascia in 3m satin black. Smoked the reverse and turn signal portions of the brake lights. Did the bed lights also.

 

[faiello]

Installed AVS Bugflector II and AVS Low Profile window ventvisor

 

[PNW_Ranger87]

I did my first oil change on the truck, along with a tire rotation at 5k miles. I also vinyl wrapped the lower bumper fascia in 3m satin black. Smoked the reverse and turn signal portions of the brake lights. Did the bed lights also.

Looks great with the skid plate wrapped. I know there's quite a few people that don't really like the lighter color of the skid plate.

 

[BHunted]

Looks great with the skid plate wrapped. I know there's quite a few people that don't really like the lighter color of the skid plate.

I hate that color too. I'm having it wrapped as well. At least the front portion, not the main plate. I may just try spraying the back with plasti-dip or something... Curious if the sensors were painted. You can't cover those with wrap....

 

[First Ford]

Not that the Ranger needs more back up lighting, but I hooked up some old Rigid lights to my reverse lights.

Can you show us where you mounted those?

 

[mlosi762]

New FX4 decals to match the BAP

 

[chasvs]

Following....do you have a link to what you ordered?

There's a Thread on this Forum about it. Here's a posting from the Thread with Ordering location info. It's the Ford Accessories site.

https://www.ranger5g.com/forum/thre...-damper-part-99406a10.4778/page-11#post-75439

 

[foulmouf]

Gathering up a bunch of garbage wood laying around my property to be burnt today.

Sponsored