Wheel pictures

[Todd B]

Looking for pictures of -8 to -10 mm off set wheels on a Ranger to see how far they stick out of the fender .
Thanks
Todd

Sponsored

 

[Coreyw]

Why don't you check this Dick Cepek Wheels? It is perfect for all Rangers.

 

[Rene Michaels]

+35 offset (edited)

 

[Todd B]

-35 offset

Thanks,
I ordered Titan 7 T-AK1 wheels and once I get installed I will post pictures.

 

[IcemanSTX]

-35 offset

+35?

 

[Ames]

+35?

Positive pushes the wheel toward the centerline of the vehicle. Negative pushes it out away from the centerline. Here's a visual that explains it.

 

[IcemanSTX]

Positive pushes the wheel toward the centerline of the vehicle. Negative pushes it out away from the centerline. Here's a visual that explains it.

Oh yah I know what it is, he said -35 offset which is crazy far out

 

[Ames]

Oh yah I know what it is, he said -35 offset which is crazy far out

I agree that it's a crazy change. Your +35 comment made me think you were saying he meant + instead of -

 

[OxyGenIII]

Oh yah I know what it is, he said -35 offset which is crazy far out

Ya, based on his pics that doesn't look like a -35. A +35 is more likely.

My 17x8.5 with a 0 offset on 285's poke much further. A tad more than I wanted. I'd have done +15 or so.

 

[IcemanSTX]

Ya, based on his pics that doesn't look like a -35. A +35 is more likely.

My 17x8.5 with a 0 offset on 285's poke much further. A tad more than I wanted. I'd have done +15 or so.

I'm in the same boat man. I got/ have Method 701 16x8 zero offset with 265/75 R16 and they poke out about 2" on one side of the truck. I knew what I was getting myself into but did it anyways. Now I'm selling and looking at more tuck options

 

[IcemanSTX]

I'm in the same boat man. I got/ have Method 701 16x8 zero offset with 265/75 R16 and they poke out about 2" on one side of the truck. I knew what I was getting myself into but did it anyways. Now I'm selling and looking at more tuck options

I like the poke, but knowing me it means chasing my tail buying fender flares and more and more mods and I'd like to leave the crash bars alone for now if possible

 

[Rene Michaels]

+35?

I'm an idiot, yes +35 offset.

here's my original post
https://www.ranger5g.com/forum/threads/what-did-you-do-to-your-ranger-today.4696/post-237272

 

[IcemanSTX]

Minus 35. Factory is -55 and I wanted to keep it as close to that as possible with the wider tires.

It looks great, I'm shooting for the same offset. It is +35 tho. Stock being +55, not negative. Negative 35 on these trucks would have the wheel/tire out about 3 inches past the fender.

 

[Rene Michaels]

It looks great, I'm shooting for the same offset. It is +35 tho. Stock being +55, not negative. Negative 35 on these trucks would have the wheel/tire out about 3 inches past the fender.

My mistake, see above edit

 

[IcemanSTX]

My mistake, see above edit

Oops, just missed that.

Sponsored