Adhesive tape for roof triim

[mark_anderson_us]

Hi all
I just installed a Prinsu roof rack and I need to reinstall the roof rails that have been cut. The existing adhesive tape looked about a 16th or eight thick.

. Anyone have any idea what kind of adhesive tape I can use to reinstall the trim

Sponsored

 

[Rinn69]

3M UHB or VHB tape (the black tape with the red peelaway strip) and get the adhesion promoter that goes with it too....it comes in either a wipe or a little cardboard tube with a glass vial inside that you break to activate. Clean the area with alcohol, wipe on the adhesion promoter, let it dry, apply the tape and viola. Make sure the 2 parts are FIRMLY pressed together. You can also get the promoter in other forms, but unless you're using a LOT of the tape, either of the 2 choices should suffice.

 

[mark_anderson_us]

3M UHB or VHB tape (the black tape with the red peelaway strip) and get the adhesion promoter that goes with it too....it comes in either a wipe or a little cardboard tube with a glass vial inside that you break to activate. Clean the area with alcohol, wipe on the adhesion promoter, let it dry, apply the tape and viola. Make sure the 2 parts are FIRMLY pressed together. You can also get the promoter in other forms, but unless you're using a LOT of the tape, either of the 2 choices should suffice.

Thanks!

Sponsored