MrRisk
Well-Known Member
- First Name
- Nick
- Joined
- Feb 2, 2019
- Threads
- 13
- Messages
- 209
- Reaction score
- 658
- Location
- California
- Vehicle(s)
- Ranger XLT
- Occupation
- Mechanic
- Vehicle Showcase
- 1
Thank you. The ranger is photogenic.Great photo!
Sponsored
Thank you. The ranger is photogenic.Great photo!
How easy was it to apply the raptor grill? Was thinking about getting it for mine. And where did you get yours?Shadow black with fresh ceramic applied. The paint quality is much better than my 2016 RS.
https://www.ranger5g.com/forum/threads/raptor-grille.1460/How easy was it to apply the raptor grill? Was thinking about getting it for mine. And where did you get yours?
The hooks are not Line-X'd, did you install them after?My 2019 and just got line-x in today
Those are stock hooks. Not sure why they were removed before spraying the bedliner.The hooks are not Line-X'd, did you install them after?
I was hoping to install some extra hooks before I get Line-X done, so they are covered with it. I am not sure if those are the stock hooks you have there.
I requested them not to be coated. If you use the hooks a lot the spray will eventually peel and look like crap. The hooks will be powder coated. We have a local shop that has a black everything day.Those are stock hooks. Not sure why they were removed before spraying the bedliner.
Here's mine. So far I've done the Rough Country leveling lift, removed the front guards, and mounted Fuel Offroad Podium D619 18x9 (offset = +20) wrapped in BFGoodrich All-Terrain T/A KO LT275/70R18. I wanted to do 17's, but I couldn't find anything I liked with offset greater than 20. I haven't removed the rear guards (because it looks like a total PITA), but I only get a little bit o' rub at full lock in reverse.
And since the underseat storage is lacking, I mounted a 20mm ammo can in the bed, loaded with some roadside & recovery gear, as well as a block of wood to put under the jack if I ever need it.
I'm currently beta testing the Peragon bed cover but I ran into a few issues during install that their engineering team is looking into.
Drone pic: