What are the holes in the bed walls for?

[franciscoapg]

Thanks for this, never saw it before and just placed my order!

I think you'll be pleased. Also installed and it's a good product all around.

Sponsored

 

[thewhiteranger]

Thanks for this, never saw it before and just placed my order!

me either -- what do we need to instal this? what parts?

 

[thewhiteranger]

i got it. good design, good construction, easy install, works great. those 4 big round holes would be perfect for lights if wolf haus would be kind enough to make some i'd be in for a set

have you installed this? I looked a the page and it doesn't look like there is a kit just parts what parts are needed? this is a great idea! even time I go on this page it costs me money

it looks like the part that goes into the bed is one piece and the pigtail has as 12 cig lighter plug on one end and the blk/red on the other? so to use it, you need to open the cover and attach the pigtail - is the right? just want to make sure I order the right thing

 

[myothercarizahearse]

have you installed this? I looked a the page and it doesn't look like there is a kit just parts what parts are needed? this is a great idea! even time I go on this page it costs me money

it looks like the part that goes into the bed is one piece and the pigtail has as 12 cig lighter plug on one end and the blk/red on the other? so to use it, you need to open the cover and attach the pigtail - is the right? just want to make sure I order the right thing

the part that attaches to the bed is 1 piece with wires connected to back (for connection to truck's wire harness) and thoroughly weatherproofed. the pigtail plugs into the socket in the bed with 2 option 1) cigarette socket 2) bare wire ends. you just need to decide if you want lighter outlet or bare wire leads to do whatever you want.

it took less than 10 minutes to install and the hard part was trying to get the cover off the truck's wire harness. the whole setup is solid and worth the asking price for 1 main reason- no cutting through your bed

oh yeah, can't forget what's important, he's an Ohio Boy WOOT

 

[r1ch999999]

https://wolfhaus01.square.site/

He is a member on this site as well

I did not know about this. I heard there was a factory option for a power point, I was thinking about using it and this might suit my needs.

Now, I wonder if the wiring back there is enough to support a larger inverter. And I also wonder if an inverter would survive/be mountable in the side/under the bed. I wouldn't mind a 110v plug back there too.

 

[Kemo Sabe]

Does anyone know what accessories or missing parts use the various holes in the bed sides?

I have a drop in bed liner, so these holes are hidden. I’m missing out on being able to make the 12V addition.

 

[myothercarizahearse]

Now, I wonder if the wiring back there is enough to support a larger inverter. And I also wonder if an inverter would survive/be mountable in the side/under the bed. I wouldn't mind a 110v plug back there too.

the outlet and wiring are rated for 12volts at 20 amps or 240 watts. i tried using it power a 150 watt fridge and it's not enough to start the compressor

 

[QVO's.Rig]

Does anyone know what accessories or missing parts use the various holes in the bed sides?

I recall wondering the same thing after I had the bed liner removed and had it sprayed instead, noticed these holes and did a search for bed hooks. I ran into some anchor rings you could use in those holes. I'm not sure if I can link in case the link is not allowed search for.
Bull Ring Bullet Retractable Anchor Points - 1001

i removed the link don't want to get kicked out.

 

[Hardy12000]

Maybe its a place for a liner tab to pop into?

Sponsored