Ground Effects?

[Chris073]

Okay not really ground effects like import tuners have, but was wondering if anyone has done anything to cover up the bottom strip of sheet metal below the sill? I have factory running boards and don't like the exposed metal you can see here:

Sponsored

 

[Gsxrdoug]

https://www.amazon.com/dp/B07QB8R8Q...olid=2FRMGHTK3TWQO&psc=0&ref_=lv_ov_lig_dp_it

Kinda covers it up.

 

[Grumpaw]

Also been thinking of a way to cover/protect that welded crimp edge.
Thinking of something like this if I can figure out how their measurements work....

 

[P. A. Schilke]

Okay not really ground effects like import tuners have, but was wondering if anyone has done anything to cover up the bottom strip of sheet metal below the sill? I have factory running boards and don't like the exposed metal you can see here:

Hi Chris,

FYI.....That exposed flange is called a Pinch Weld Flange....

Best,
Phil

 

[Chris073]

Hi Chris,

FYI.....That exposed flange is called a Pinch Weld Flange....

Best,
Phil

Thanks. Now I know what it's called! Still not a fan. ?

 

[Trigganometry]

Covering this up with U channel is only inviting a corrosion environment by trapping moisture. Best thing you can do is use undercoating spray or brush on paint for extra prevention. No kidding, I was contemplating using flex seal black in this area to rubberize the application. Worst it could do is peel off to then need reapply. I think there is some sort of coating like this already before they body color paint it.

 

[Grumpaw]

Covering this up with U channel is only inviting a corrosion environment by trapping moisture. Best thing you can do is use undercoating spray or brush on paint for extra prevention. No kidding, I was contemplating using flex seal black in this area to rubberize the application. Worst it could do is peel of to need reapply. I think there is some sort of coating like this already before they body color paint it.

You bring up a valid point...would probably hold moisture and eventually rust.

 

[Danager]

It could be that Ford has a solution for you.
Part Number VKB3Z-99279D36-B

 

[Chris073]

It could be that Ford has a solution for you.
Part Number VKB3Z-99279D36-B

Well THAT'S pretty interesting. Thanks for the tip.

 

[Chris073]

https://www.amazon.com/dp/B07QB8R8Q...olid=2FRMGHTK3TWQO&psc=0&ref_=lv_ov_lig_dp_it

Kinda covers it up.

Yeah I like it, especially black, but wonder how much down it covers. I'll scour the internet for pics. Thanks!

 

[Gsxrdoug]

Try this post. Bunch of pics in it. https://www.ranger5g.com/forum/threads/door-sill-protectors.14859/page-2#post-298019

 

[P. A. Schilke]

Covering this up with U channel is only inviting a corrosion environment by trapping moisture. Best thing you can do is use undercoating spray or brush on paint for extra prevention. No kidding, I was contemplating using flex seal black in this area to rubberize the application. Worst it could do is peel off to then need reapply. I think there is some sort of coating like this already before they body color paint it.

Hi Rick,

I am going to show my weakness for the 5G in that many joints like this pinch weld flange are lined with a seam sealer prior to spot welding and I suspect this is the case here, but IKD for sure and hesitate to state this is a sealed joint as I am not in the know. Therefore I would heed your advice unless someone can say one way or the other...

Best,
Phil

 

[Sign1941]

It could be that Ford has a solution for you.
Part Number VKB3Z-99279D36-B

Yikes! $335 each.... No thanks

 

[JACKSMYDOG]

Take your body hammer to it and fold it up to the inside where you can't see it


Seriously though, flat black rock guard would be my go to.

 

[Chris073]

Take your body hammer to it and fold it up to the inside where you can't see it


Seriously though, flat black rock guard would be my go to.

I saw in another thread that someone used Plasti-dip on it. But yeah, I think I'm getting those black ones from Bushwacker.

Sponsored