Are you planning to cover the plywood under the platform with automotive carpet that matches the interior, or will you coat it with something like Raptor so it’s resistant to scratches?Basically a use or lose type of deal so it was more of a "staycation". Got a few unfinished projects around the house done, went on a few bike rides when the weather was nice and, knocked out a few to do's on the Ranger.
First, the rear seat delete.
https://www.ranger5g.com/forum/threads/scab-seat-delete-project.26493/
Just like people said, removing the back seats were very easy. I put sound deadener on the back before putting everything on like @alaska2baja did. I will say, 2 things I wasn't expecting. One, that the main back panel is a carpeted panel, I thought it would be hard plastic. And two, didn't realize how involved it would be and how much I would have to remove to install both pieces, nothing hard, just time consuming. I don't know what @alaska2baja did regarding the seatbelt buckles, but I opted to tuck them in the corners behind the panels. I wrapped them in cloth tape a little to prevent rattles. So far so good.
![]()
![]()
![]()
![]()
![]()
I haven't tackled the platform yet as I am still figuring things out as I want it hinged somehow so I can access the storage bins. I do have a nice piece of plywood that is leftover from the work bench I re-did that will be used. Also big thanks to Benny @LevittownFordParts.com for getting me the parts needed for this.
Next, I decided to install a wireless charger. I got the idea from a youtube video I watched of a guy rebuilding a wrecked Tremor.
Its was cheap and easy, things I like
Now because of my OCD, I bought a used rear panel with the USB ports off of ebay as well to get an extra USB plug to fill the hole left from using one of the USB ports for this project. I already had the console tray, more on this later.
![]()
![]()
![]()
![]()
![]()
Now, the charging pad itself I had to trim a little to fit the tray insert, no biggie as it's just rubber on the ends. THAT, should have been a light bulb moment. After all of the work I put into this....MY PHONE DOESN'T FIT IN THE TRAY!!I should have checked that first. But, I know it works as I tested it with my ear buds.
![]()
But the idea of removing the rear seats and soundproofing the bulkhead is genuinely cool; it makes the cabin much quieter on the highway and opens up tons of space for gear especially if you add a hinged cover to access the lower compartments. In the evening, after spending the whole day in the garage wrestling with wrenches and interior trim, when I just want to kick back on the couch and take my mind off things, I often visit holyspin.com for this. It’s a great place to enjoy some lighthearted, stress-free entertainment and get into a positive mood. It helps me reset and look back with a smile at my own mishaps while working on the car.
So, I have been looking at other style trays that my phone should fit and I found a couple I will try out. This wasn't a "need" type of upgrade, just something simple and cheap so no real hurry. Lesson learned though, probably wouldn't have went through with this had I known my phone was too big lol.
I was originally planning a LineX/Raptor type coating, but I think I'm gonna go with carpet. I have some cargo blocks that are velco backed and they will be good for keeping groceries and such from sliding around.Are you planning to cover the plywood under the platform with automotive carpet that matches the interior, or will you coat it with something like Raptor so it’s resistant to scratches?
I will. I have a few more exterior things to button up this weekend, then I'm moving on the the interior. I have a black headliner all ready to go in.Morning OP. Post some pics of the final project please. Rear seat removal is now in my “pretty soon” horizon.
. Now that it's cooled off, garage time will be more comfortable.