Superdannyboy
Well-Known Member
- Thread starter
- #46
Sounds like fun!Im not going to go with the apg suspension. I will do King 2.5 Coil overs with upper arms and use factory lower and factory axles. I will run 35 12.5 17 Yokohama Geolander M/T G003 on a beadlocked 17 wheel with -38 offset if that wont be enough poke i will use a spacer
Yea that's what I mean, adapter/spacer. From what I've read a spacer goes onto the hub but an adapter bolts onto the hub with the factory lugs and has its own seperate lugs to bolt the wheels to. I'm probably gonna order the BORA 2" adapters from stage 3. Once I get the bedsides I'll see how much more poke I need because I have a -10 offset and my wheels are like 11.4" wide. I also have to take the 1/2" of poke into account by moving up to 315/75r16's which is about 12.5" wide. I know the ADV fiberglass is 4.5" wider but my wheel is sticking out right now, so I've got to find the right poke with the fiberglass on the rear.
Your's looks pretty good with the -38 offset.
Sponsored