I'm almost finished up installing a Kenwood HU with the supplied harnesses' from idatalink, Maestro Rr interface,
HR/FO2 and Ken2, before i permanently reinstall i checked out what was working and what was not.
The BU camera is not coming on in Reverse, i have the yellow RCA plug into the HU...
Not wanting to spend hundreds on a new airbox i went ahead and did my own take on the fender feed intake that's posted here on the forum but routed from the grill area where the factory intake gets its air, i used a 1.5'' tube for now because the opening next to the radiator support was only...
So pretty much soon after i installed these tires about a year ago i had this browning or blooming circular band on the sidewall (all four) i use Black Magic brand tire wet foam dressing to 'blacken' them and when that wears off (which seems pretty quick i'm left with this,.
Now i have 4 cars...
From the UAW's press release these are the first to go out, hopefully it won't be a long one and they could come to a fair deal for both sides.
Michigan Assembly
Ford's assembly plant in Wayne employees close to 3,000 workers who are represented by Local 900.
The plant, located next to the...
So at what miles did you first notice the noise of the warped blend door?
Thinking about increasing the time/miles of my ext warranty so i'm covered just in case.
TIA.
Is there one? I never noticed, wondering if it's there but not working, can you guys check yours?
(not the flashing bar for crash avoidance/ braking)
thanks.
So dealing with the long travel/mushy pedal I tried the Forscan ABS bleed, didn’t really make it any better, I know some reported it worked for them so don’t discount trying it, then while the truck was in the shop yesterday for the global leaf spring swap I had them do a traditional bleed...
While cleaning out some debris between the bed & cab I noticed the drivers side gap is much more than the other side, is this normal or common?
Other than looks (to me) any thing to be concerned about alignment being off
Looks to be roughly 1/2” on pass and 7/8” on driver side.
Not looking for a...
Heard a truck and didn't go right away outside, when i first saw them laying there i thought that somebody was playing a joke dumping garbage in my driveway mainly cause i wasn't expecting them until June 5th.
And like I've read by others posting about the global springs delivery it's much...
So I have the lean like others have, any thoughts or experience on arching the left spring about a inch by a shop who does that work?
I took measurements from the top surface of the leaf to the underside of the frame and there is at least 3/4" less of a gap on drivers side and you can even...
So after my truck sat for a couple weeks the battery was pretty much dead the radio presets were still there i got it charged and have been keeping it on the Battery Tender w/1.5 amp trickle and it's been starting fine with 12.6 multimeter measured volts before starting. Curious though as i am i...
After i login and go to dashboard my vehicle shows correctly but when i go to 'connected services' it says
" No connected services available at the moment" i get no remote start option, door lock, or mileage & location. I've had these choices in the app previously.
I've updated it (hopefully...
Anyone have issues logging into their account either to pay online or check the statement, I've tried the app on my Android, my i pad and two different windows browsers all say invalid login 2.0.
Next is the customer service route to see what's happening.
Anyone use this for cleaning carbon from the intake valves? I'm aware of the walnut blasting procedure but with only 12,400 miles to date and not wanting to remove the top of the motor i was thinking this might be a sort of preventive maintenance cleaning for whatever may have started. I'm ready...
Is there a way to figure out the RPM (more accurate than the tach)at a particular speed for the purpose of determining the optimal or most efficient mph?
After solving the soft shocks by replacing with Bilsteins 5100’s I want to try and solve the left side lean I noticed that I have two shims on the left rear spring and only one on the right side, it sits 1 inch higher on the right side and the shim is not a inch thick, but was thinking of...
So installed my setup from Tire Rack a couple days ago and today did a 180 mile road trip and almost immediately upon hitting 62 mph (approx) and up thru around 80mph a noticeable and annoying vibration that was not present before the changes, the steering wheel is not shimming it tracks...