Search results

Another thought that comes to mind - Ref: Tire Size You changed the size back with Forscan and the (Fault) CEL cleared. But somewhere is a (TAB) in the FDRS to - Relearn Vehicle Data My hunch is that since the PCM was possibly (Re-Flashed) in addition to the (Solenoid ID Update) The updated data...

Yes, if you Hit (Auto) or (Max Defrost / AC) button again - while in the (Max) modes. Max drives the Temps (Full HI or Full Lo) - and when you hit the buttons again. It should revert back to the (Selected Temp)

But, with remote start (request) Are the Door Locks - Triggering to LOCK and are ALL 4 - Door Lock (Button Lights) ON I have proven that the doors can be (OPEN) but the hood must be (CLOSED) Example: From (FOB) Press - Lock Quickly - Open Driver or Passenger Door (From Inside) this will unlock...

Yes - Same as the Oil Filter (Access) Just move the coolant hoses out of the way and then you have access to the block heater. And IF you just want to - Remove it - here is the PN for the Plug to plug the hole: This is what the current Recall calls out - remove and install this plug - until...

What happens when you try - Remote Start? Key (Requirements) are - Doors (Locked) and Hood (Closed) I am looking for (is a door lock) signal being sent - they should click when remote start is requested. and lights will flash from that (signal) as well. Have you tried both - FOB & Ford APP...

The 2019 Manual - Calls for the Intake Removal - however the 2020 and up, that step in no longer in the manuals. It was only for ease of access and can be done without removing the intake manifold.

Question Answered: Changed in 2019 (Production) Early & Late Late 2019 Production and up they split out the fuse. So, this is why it has not been noted before, only early production 2019's have it wired this way. Note: This only shows in the 2019 Diagram, 2020 and up is all late production...

Negative: All 5G Rangers have this type of mounting plate for the mirror Mounts on the (Bolt Head - Type Knub) You may search as there is another member on here who (adapted) a aftermarket mirror to the mount plate. This mount plate is part of the glass and comes with the glass.

Here is some insight on the internals of the Climate Control Box As you have noticed, we have a huge air inlet door and even with the Air Recirculation (On) door closed its still not 100% closed, as it allows outside air (In) at all times. When the truck is turned off - the air inlet drives to...

I am working on a hunch - but when you get it back together, I need to know any other issues you are having other than throttle limitation. Anything else noted - hard starting, IPC Messages, door locks not working and I am focused on the Gen Desired Voltage - defaulting to 10.6 Plus, it would...

If I recall correctly, the T-Shoot procedure for leaks here - replace the tube assembly, since this is a warranty repair- that’s what the dealer is doing. So tube replacement also replaces the O-Ring (Gasket) With 2 previous tube replacements, something is not right - either mating surface or...

Cool - and I plan on investigating when in the production they changed the wire pinouts and split off the fused power - I assume it was in the 2020 production run early or late.

Ditto, you need to be on vs 23188, there are various threads on how to update via USB, just be sure to follow the directions (precisely) and do not remove the USB from the truck until it says to REMOVE USB, do not remove it at the Update Complete (Message) it's not finished.

To the (OP) Understand what we are deciphering about - It appears that we have found a discrepancy in the wiring diagrams and for the 2019 - It appears that Fuse 32 does indeed power the APIM. Although is still may be fuse 31 - whichever one dumps power to the Sync The fuse needs to be pulled...

Cool - hopefully it will remain leak free. I am wondering if the previous replacements they were not torquing it down evenly. One side fully torqued before the other side. So even though the manual does not state to do so, snug it up - Both Bolts, then 1/2 the Torque Spec on each bolt, then 2nd...

Ok, noted for at least the 2019, I wonder if the 2020 is the same as that was the year they made some changes - 2nd year production. This is a good catch and noted for the difference.

Previous Versions - All had various issues and plagued with problems The list I could find (via Google) vs 21020 - Eary 2021 21265/21194 - Late 2021 22251 - Early 2023 (This one was the most noted as problematic) 23088 - (Intermediate Build - that resulted in vs 22251) still being display on...

We all have 3.4 - but it's the version of 3.4 that's important

IDK why they have the circuit wired differently (diagrams) or even in your owner's manual. II suggest checking your BCM fuse box to verify which is correct. If you are correct, then we have (FOUND) a wire change, that has not been noticed or documented before - and with all the (posts) for the...

Ref: Diagrams