Search results

Well the transmission is newly rebuilt by Ford, it only has about 3k miles on it. I checked the fluid a week or so after I got it back and it was fine. Was planning on putting a single piece driveshaft on before the re-build as it has had that clunking/vibrations even before the tranny was...

I have some serious clunking and vibration going on when Im at about 25-40 MPH. The transmission is brand new so im guessing its the driveshaft. Been looking at the Knoxville one so I am glad to see someone here was able to get one on. How was the install? Pretty straight forward Im guessing...

Hey all, so Im upgrading my speakers next month. This is the sub that's is supposed to go in my 2019 Ranger Crew cab...

What is the little metal tube (the one plugged into the end of the rubber tubing) called and where did you get it ?

Hey all, I grabbed a set of 17" rims so I could swap to a set of winter tires next winter. The tire load rating of the truck is 110T. I found a set of Toyo GSI-6 LS that are rated at 115H. Looks like the weight and speed are both higher so Im assuming they will be fine? Anything Im missing or a...

Thanks for the replies. Good to know I dont have to mess with the Adaptive Cruise Control

Hey all I saw a video of a guy that changed his shocks out, Fox 2" leveling kit I think. At the end of the video he said that you would need to adjust the headlights and the adaptive cruise control if you have it. I figured the head lights would need an adjustment but is he correct on the...

My truck has the 18" wheels with 260/65R18's which are 30.5" tall. Im planning on getting a full set of winter tires but was hoping to drop down to 17" rims as I have found several really good deals from private sellers. Much cheaper than buying 18's. But then I remembered the spare and thought...

What size tires are those? Looks good. Im about to upgrade the suspension and add a small lift and looking to get a little bigger tire. Thanks

Thanks :) Curious if you think a set of 265/65R18's will work after this kit is installed? I turned the wheels all the way and it looks like there is about 1 and 1/2 inches of clearance. The new tires would add exactly 1" total height so it might be close, but with lifting the front 2" it may...

Ive read (and it appears by just by looking) that the front is about 2" lower than the rear. Im looking to improve the suspension 1st and foremost as the stock shocks/struts just arent getting it done. But I would also like to get a little lift and level it out. Im thinking 1"-2" in the back (...

So I decided to try to use my extractor for my first oil change. But I wanted to see how much it actually got out, so after I extracted everything that it could I went ahead and pulled the drain plug. I got out another quart of oil. so in my opinion extracting is not very good because it leaves...

Would be awesome to add even 4-6 more gallons. Something I didnt really consider when I bought mine was the refilling every 320 miles. Kind of a bummer that they didnt put in a 22 or so gallon tank.

Just an FYI for those that use this method or are considering it. I did my 1st oil change today and I used the oil extractor through the dip stick. Got about 5 and a 1/2 quarts. I then pull the oil drain plug and got about 3/4 of a quart. So it appears that the oil extractor method leaves...

Wish there was some real data on some of these oils for GDI engines. Mostly just because Im a curious guy, I realize that the difference between one oil and the other is, in most cases statistically insignificant. I read the following from an interview with someone at Driven and it just peaked...

Anyone try this yet or know anything about it. https://www.drivenracingoil.com/di30-5w-30-synthetic-direct-injection-performance-motor-oil.html