Sponsored

Search results

  1. Third Brake Light - Chase Lights

    That is correct. Same part numbers listed for both. This is the third brake light I got. Click on "See compatible vehicles" and it lists them all.
  2. AlphaRex LUXX-Series LED Projector Headlights Black

    That is how my Nova's are too. I am fine with that. It appears that the vertical part is just for the start up which is a bit odd. I did connect the grill lights to the DRL and like the look. EDIT: It looks like that is by design. See second photo.
  3. FORScan Modifications

    I threw out my stash a few years ago. :(
  4. FORScan Modifications

    As stated here. https://performanceparts.ford.com/part/M-9603-REB I did the ProCal tune on my Ranger and my brother's Bronco but used Forscan to do tire size changes on both of them. I never tried with the ProCal.
  5. FORScan Modifications

    The ProCal has an advertised limit of 265/70R17 making Forscan or similar a necessary tool.
  6. FORScan Modifications

    Correct. After you do the "Write", I believe it tells you to power off. Do that, then turn the key to "Run" without starting. Then, turn it to off, disconnect the OBDII and start the motor. Everything should appear normal at that point.
  7. FORScan Modifications

    I went to 265/70R17 and changed from 2360 to 2438 with no issues. Try again and do the power cycle as it tells you to (off and then on with no start). Turn it off and start the motor normally. I actually made about 4 changes, followed by a test drive and using 10 miles worth of mile markers and...
  8. Anzo Tail Lights

    Kalifornastan would probably jail you if it wasn't...
  9. Anzo Tail Lights

    That doesn't surprise me. Good luck collecting! My brother had to go there for work to pick up some stuff. 36 gallon tank in his F-150 came in handy. :)
  10. Getting vehicle serviced

    There are exceptions, just a general thing. I have a good friend of 50+ years and amazing mechanic. I have worked for him on and off for 30 years. He worked for a local Ford dealership for about 6 months and left to open his own shop. He hated flat rate and the sub-standard work that is...
  11. Getting vehicle serviced

    Dealerships in general. I have worked at repair shops as side work for 25 years and every mechanic I worked with that worked at a dealership advised against taking a car there ever. I have heard horror stories of heads being "torqued" with an impact gun to the 17 YO with the broom getting sent...
  12. Getting vehicle serviced

    I always do my own but my last choice would be a dealership. Ask around for recommendations for a local shop, preferably one where the name ends in “& Son”.
  13. Anzo Tail Lights

    I live in Arizona and everyone here knows if you have to go to California, fill up on the state line and bring a 5 gallon can. Hopefully you can get in and out without refueling there.
  14. What did you do to your Ranger today?

    I got a set of OLM headlights ((like Morimoto XB) a while back on Ebay for under $450. Took a chance with no warranty. They were fine for a while but occasionally a few bulbs in the sequential directional wouldn't illuminate. Then, on low beam they started leaking light like highs were partially...
  15. What did you do to your Ranger today?

    Time delay is fine. Dating myself here but when I was in high school in the '70's, occasionally I would wave around a wire coat hanger and admonish my 9 YO brother with "No wire hangers ever!". He was amused by it but one day he was watching the movie "Mommy Dearest" in his college dorm. When...
  16. What did you do to your Ranger today?

    Except for that Mrs. Lincoln, how was the play? :) Glad you finally won.
  17. What did you do to your Ranger today?

    @Blue Streak https://www.amazon.com/dp/B0897HMX74?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_2&th=1
  18. Transmission Fluid Swap

    Nice! Thank you! I am replacing the pan so I can pre-mark the new pan.
  19. Anzo Tail Lights

    I do. They are compatible for BLIS and non-BLIS and LED or standard bulbs.
  20. Transmission Fluid Swap

    Thanks, I got a good wrench for that I hope and a 12V pump. Still mulling the bolt situation. I may make a cardboard mock up of the pan to hold the bolts.





Top