Baja Designs Ranger Specific Applications

[WxNerd2015]

Pic taken from Baja Designs Facebook Page - See original post here

Hey, just wanted to share as I came across these a day or two ago! Baja Designs has 2 vehicle specific applications now for the '19 Ranger! I believe a few have already highlighted the Fog Pocket Kits that replace your factory fog lights (thread with videos from @Robby887 located here) with the Baja Designs ones, but the kit is located here.

Ford, Ranger (2019), Fog Pocket Kits

The one I am a bit more interested in is the bumper kit from Baja Designs! The kit looks interesting and should work just fine if you also have the adaptive cruise control in the front bumper too! Though the kit does look pretty simple, with no real bracket seen, so I wonder if there are existing holes it is bolting to? No quite sure exactly how they are attached yet, but IMHO it looks pretty dang good! Though if it simply bolts up with no extra bracket, could lead to many other possibilities to install your own favorite light! Anyways, here's the kit:

Ford, Ranger (2019), Grille Kits

Sponsored

 

[Andy]

I’m ordering the fog light kit this week.

 

[oggvorbis]

Installed the fog light kit last week and didn't really run into any issues. The instructions were a little vague and the pictures included aren't the greatest and in black and white. I'll probably do a step by step post later this week

The fog kit also includes the usual universal brackets and the battery wiring and on-off switch too. I'm guessing they just grab their universal squadron kits and add the Ranger brackets and Ford harness adaptors. The grill kit looks like there isn't any bracket included and you're just mounting it to the bumper directly.

 

[Randy2400h]

Message me for the coupon code. I just used it on the BD website, so I know it works.

 

[Randy2400h]

I ordered two additional lenses because I want the Amber for actual fog conditions.

 

[Andy]

Id like to see the Amber ones at night. I ordered the Pro versions with the promo code and might buy some amber lenses after I see how the beam pattern is on the Pros.

 

[oggvorbis]

Id like to see the Amber ones at night. I ordered the Pro versions with the promo code and might buy some amber lenses after I see how the beam pattern is on the Pros.

I'll get you one later tonight. I've got the Pros in Amber.

 

[Andy]

I'll get you one later tonight. I've got the Pros in Amber.

Awesome, I appreciate it! Did you see any room for adjustment of the fog light angle when you installed them?

 

[oggvorbis]

Awesome, I appreciate it! Did you see any room for adjustment of the fog light angle when you installed them?

With the lights flush against the housing as much as possible, you've got maybe +/- 5 degrees of tilt. If being flush against the housing isn't a big deal to you, you could add some washers or spacers and get more. I'll eventually end up with a 3-3.5" lift and I don't think I'll have to add spacers to get enough tilt.

 

[oggvorbis]

Id like to see the Amber ones at night. I ordered the Pro versions with the promo code and might buy some amber lenses after I see how the beam pattern is on the Pros.

I'm really liking the beam pattern and width that the wide pros give off. As with a lot of things, pictures don't do justice to how it looks in person. Photos taken with just the fogs and Lariat running lights. Beam pattern is pretty consistent to what Baja Designs state.

 

[@Robby887]

They are nice.

 

[MrRisk]

I ordered two additional lenses because I want the Amber for actual fog conditions.

Your lenses cost more than my complete (very simple) DIY fog lamp setup.

 

[Randy2400h]

Your lenses cost more than my complete (very simple) DIY fog lamp setup.

True but I couldn’t find what I was looking for in a cheap option; a high lumen output and an amber lenses for low visibility conditions (heavy snow/fog). And inevitably when one of these lenses gets shattered by a rock, it will be easy to replace.

 

[PandaMotorworks]

These are being added to the website this week! and can that code or maybe beat it

Sorry this move slowed us down but we are catching up!

 

[WxNerd2015]

Just got the manual from the guys over at Baja Designs for the installation of the Grill Kit! Thanks to Paul over there for a fast response! Looks like the lights just replace the 4 plastic push pin clips in the underside of the opening and bolt right up using the standard hardware! If you don't have the adaptive cruise as well, you can do 5 across! Looks pretty simple light mounting wise! I attached the instruction manual below!

Sponsored