Can i see your -12 to 18 offset wheels?

[OxyGenIII]

Hello.

Can you guys share your wheels and please include the width of the wheel too. Just an offset won't help me. Looking at 17x8 17x8.5 and 17x9s in all offsets but most are for Tacomas so near 0 or slightly negative.

Here is my truck on factory wheels with spacers. I do not like much poke past the fenders. And dislike flares too.

Sponsored

 

[OxyGenIII]

Also, no crash bars, so I'm ahead of the game on any fitment issues. Just debating in the look.

 

[OxyGenIII]

Considering these. My factory 17x8 55 offset wheels with 1.25" spacers end up being around an offset of 23mm. The new wheels would be 17x8.5 0 offset

 

[NvrFinished]

Then those wheels will stick out an additional 0.9 inches plus the 1/4" from going 8" wide to 8.5" wide. So, approximately 1.15" further out I believe.

 

[OxyGenIII]

Then those wheels will stick out an additional 0.9 inches plus the 1/4" from going 8" wide to 8.5" wide. So, approximately 1.15" further out I believe.

Yes. Was hoping to see others with a low offset wheels to see if I didn't mind the wheel sticking out that far visually.

 

[NvrFinished]

OK. It just seems contradictory to your statement that you don't like much poke past the fenders. A 0 offset is definitely going to poke and is why I bought it up. ?‍

 

[JTDay]

I'm in the same boat but looking at 16x8 et0 for weight reasons. 0 offset is quite chonky. I may have no choice but to install OE BW/Lund flares.

Here's your proposes setup:

https://www.customwheeloffset.com/w...rd-ranger-method-mr701-readylift-leveling-kit

 

[OxyGenIII]

I'm in the same boat but looking at 16x8 et0 for weight reasons. 0 offset is quite chonky. I may have no choice but to install OE BW/Lund flares.

Here's your proposes setup:

https://www.customwheeloffset.com/w...rd-ranger-method-mr701-readylift-leveling-kit

Thank you for the link. Cool website to see real Rangers with wheel details to get ideas.

So in all honesty it pokes just a little further than I prefer, but liveable. Ideally an 18x8.5 et15 would be my sweet spot. Damn it. Every time I find a wheel I like I second guess myself.

 

[NvrFinished]

You might want to try Raceline Wheels. They have a few options with a +18 offset.

 

[Zeus]

If this helps any, these are 17x9 with a 4.75 backspace. The guys at 4WP said they do not go by offset.

Sorry for the crappy photos...

 

[haydnstrickr]

If this helps any, these are 17x9 with a 4.75 backspace. The guys at 4WP said they do not go by offset.

Sorry for the crappy photos...

looks sweet

 

[OxyGenIII]

If this helps any, these are 17x9 with a 4.75 backspace. The guys at 4WP said they do not go by offset.

Sorry for the crappy photos...

What size tires? I'll do the math. You're at a -6 offset based on width and backspacing we can convert it back to offset. Once I know your tire size I'll be able to see how that relates to a 17x8.5 instead of a 9"wide wheel

 

[Zeus]

looks sweet

Yeah I like the look...more fashion over function tho.

 

[Zeus]

What size tires? I'll do the math. You're at a -6 offset based on width and backspacing we can convert it back to offset. Once I know your tire size I'll be able to see how that relates to a 17x8.5 instead of a 9"wide wheel

These are 285/70/17

 

[OxyGenIII]

These are 285/70/17

Here is my setup I "want" to buy vs yours. So my setup would stick out less by .46" so about a half inch more inside the wheel wells. ? I think it might not be that bad after all.

Sponsored