Show Us Your Garage/Workshop !

[OFC Ranger]

Well I got both doors painted and I have 90% of my 16 ft shelving completed. It is 8 ft tall I have the three bottom shelves built only thing left to do is to get up on the ladder and construct the fourth highest shelf which will be for storage of items that aren't used but every once in awhile. See if I can get some pictures in the morning when I get off work.

Sponsored

 

[OFC Ranger]

Well it will do for now. Still working on organization, I need a ton more yellow HDX totes, but it will serve its purpose; get everything off the ground.

 

[bka0721]

I figured I would start with what goes into my garage before I share how I finished the area she who must be obeyed keeps me busy with projects in. Yes, they are all original.

b

 

[BDoc]

Well it will do for now. Still working on organization, I need a ton more yellow HDX totes, but it will serve its purpose; get everything off the ground.

This turned out great, Jack!

 

[OFC Ranger]

This turned out great, Jack!

Thanks. Still lots of work to do, like a loft storage system on the back wall (high enough my truck can still clear it).

Good picture on size perspective (lots of room to work still);

 

[OFC Ranger]

Well nothing ground breaking, but I bought and installed a wired motion detection light to put above the doors. I dig it. Sensor is adjustable, I have mine maxed out, it will turn on as soon as I step on my deck.

If I decide to hang out on the deck at night I can simply unplug it from inside of garage.

https://www.amazon.com/gp/product/B0876VK1XL/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

 

[Gsxrdoug]

Just stumbled upon this and thought I'd share my pandemic project. It's a bit cluttered right now, trying to finish some winter maintenance on the bikes and get one ready to sell in the spring. First pic is from mid-2019, the rest are from today.

Hoping to eventually move somewhere with a bigger garage so I can park the truck inside as well. But for now, this will have to do.

Snow blower and motorcycles, didn't think I would see them sharing a room. lol.

 

[OFC Ranger]

Needed a break from truck projects so I started the surround decking platform for my garage. The truck itself will eventually sit on a lower height concrete pad.

For a sprinkle of pizzazz I left a 1" lip on the outside to run hidden LED strips. I want to find a set of strips with a sequential style pattern so I can make it look like runway lights.

 

[9zero1790]

I figured I would start with what goes into my garage before I share how I finished the area she who must be obeyed keeps me busy with projects in. Yes, they are all original.

b

nice collection!

 

[Ranger Dave]

Love to see a plan come together
Nice!

 

[OFC Ranger]

Little more work done this morning, but I'm done till off duty Monday. Garage is a wreck, driving my ocd nuts.

You can see where its going and how the truck will be surrounded. Also once I get the flooring part done under the truck I'll start working on the office'ish loft system in the back. I am going to remove the tall boxes from my rack and have the loft high enough my truck can pull under it.

Bonus, this will also give me access to the rack without crawling up the truck itself.

 

[OFC Ranger]

Ok well I just dropped off six 16 foot 4x6's for my parking strips to work on tomorrow.

Oh boy those were fun to tote from the street to the garage... and half of them were wet.

 

[OFC Ranger]

Starting work on the drive on ramp / parking pad I have a lot of leveling to do. Each one of these boards should handle just shy of 21,000 pounds of weight.

 

[OFC Ranger]

One down one to go think I need a nap ?

 

[OFC Ranger]

Meh didn't get around to starting the other section. Got it laid out for in the morning to start leveling. Also started some temporary ramps to go at the front with some scraps. I need to cruise Amazon and see if anyone makes some shorty metal ramps.

Sponsored