Run wires from battery to cab

[aschm]

FWIW, the passenger side grommet is about even with the bottom of the glovebox, I was just able to route power and coax through it without taking the glovebox out. That grommet is much easier to get at from the engine compartment side as well.

Sponsored

 

[MTB-BRUH]

I drilled a hole in my driver side firewall and used small piece of 3/8” rubber air line as a grommet. Works great

 

[RangerRaptor]

There's a circular bump a few inches in diameter, just left of the brake pedal. I'm assuming it might be where a clutch would go?? Where did you drill through the driver side firewall?

 

[RangerRaptor]

FWIW, the passenger side grommet is about even with the bottom of the glovebox, I was just able to route power and coax through it without taking the glovebox out. That grommet is much easier to get at from the engine compartment side as well.

Thanks, I did go through that grommet on my Ford Raptor.

 

[Gavin stevens]

I managed to drill a tiny hole in the grommet and fish a wire through

Sponsored