Help with BLIS unit

[tlhdoc]

2019 Ranger limited. I broke the rear passenger slide break assembly lens.I wanted to replacement lens comma but I need to put the old blis unit. How do I remove the wire harness from the old bliss unit?So I can move it into new unit?

Sponsored

 

[RangerBill]

2019 Ranger limited. I broke the rear passenger slide break assembly lens.I wanted to replacement lens comma but I need to put the old blis unit. How do I remove the wire harness from the old bliss unit?So I can move it into new unit?

Just unscrew the screws attaching the BLIS module to the old lens and reattach the module to the new lens.

 

[tlhdoc]

Just unscrew the screws attaching the BLIS module to the old lens and reattach the module to the new lens.

 

[tlhdoc]

 

[tlhdoc]

I have to be able to unhook the wire harness from the Bliss unit in order to install it in the new unit. I posted two pictures the top one is of the old unit and the bottom one is of the new unit.

 

[RangerBill]

I have to be able to unhook the wire harness from the Bliss unit in order to install it in the new unit. I posted two pictures the top one is of the old unit and the bottom one is of the new unit.

Unscrew the 2 screws from the black module and remove from its mounting plate. Then you can gain access to the connector.

 

[tlhdoc]

Thank you very much

 

[dozxab]

Install video for the Anzo's I went to but jump to about 3:00 for the BLIS.

 

[tlhdoc]

Thank you!

Sponsored