Exhaust Tips

[RangerRod31]

Looking to purchase an exhaust tip for my Ranger. It has to be black. Thinking matte would be nice. Any suggestions and pictures? Thanks

Sponsored

 

[spartan0078]

Borla makes really nice matte black tips. I'd post a photo but their website seems uncooperative at the moment.

 

[NurseNeil]

Looking to purchase an exhaust tip for my Ranger. It has to be black. Thinking matte would be nice. Any suggestions and pictures? Thanks

I painted mine with engine paint, there is a post here. It matches my magnetic package.

 

[Trigganometry]

Did this one. Looks sharp and very heavy gauge steel. Should last a long time. I cut about 5” off my tail pipe as I didn’t like the look of 2 pipes. Also drilled a small drain hole as the lip is flanged

https://www.amazon.com/gp/aw/d/B00HQZA7C8?psc=1&ref=ppx_pop_mob_b_asin_title

 

[OrangeStreak]

Go Rhino Black Matte Exhaust Tip 3" inlet, 4" outlet, 10" length (GRT3410B). This same Tip also comes in a 14" length. Got it at autoanything.com. Matches great with the black STX trim. I started by using a 3/8" drive and tightened it all the way but the Exhaust tip was still loose. I then decided to go with a 1/2" but said no, too much torque will surely strip the threads. I remembered that a member on this forum said to use WD 40 on the threads and this did the trick. I placed the back edge of the clamp 1/8" from the back edge of the Exhaust Tip (see photo #2) and tightened it down easily with the 3/8" drive.

Sponsored