Sold: Pennsylvania 17” Wheels, Tires, TPMS & Lugs - $900

[my_hero_nero]

Hey Ford Family.

I just put Bronco Sasquatch 35 takeoffs onto my 2024 bronco 4 door. Which means I no longer need my standard wheels & tires.

Members on my Bronco6g forum suggested I list these here as well as they are the same 6 X 139.7 lug pattern that the Ranger has.

Selling all 5 wheels, tires, tmps and lugs. 265/70/R17 with +55 offset. General Grabber A/Tx 32" tires. Taken off at 350 miles. Brand new!

Asking $1,200 $900. I'm located in North West Philadelphia (Manayunk). I will be doing a far bit of traveling down south on 95 to central Virginia over the next several months and would be able to deliver. Delaware, Maryland, Virginia and New Jersey are all within range.

Sponsored

 

[Superspirit]

Wish you were closer.
I'm in NM, I'd take them if they were closer. But your clean across the country from me.

 

[my_hero_nero]

Wish you were closer.
I'm in NM, I'd take them if they were closer. But your clean across the country from me.

Wish I could teleport them for you ?

 

[SpaceGhost]

Hi, Are those wheels black or dark gray?

 

[my_hero_nero]

Hi, Are those wheels black or dark gray?

They’re black wheels

 

[rburke202]

Anyone know if these will fit on a stock (no lift) 22 XLT?

 

[my_hero_nero]

Anyone know if these will fit on a stock (no lift) 22 XLT?

Found this thread for you:

Sounds like it would fit, but would be the maximum size.

 

[rburke202]

Thanks. I did some research yesterday and came up with that as well. Are the wheels shiny or matte black?

 

[ControlNode]

They look matt in the images, really close to the finish on the RS forged wheels. Really those could be perfect for my plans for my XLT with black appearance package for winter/offroad wheels while using the OE 18" for towing and road use.

 

[ControlNode]

How is the cap on there? Are the "legs" of the cap part of the cap or part of the wheel's casting? If the "legs" are part center of the cap, does the center of that also popup out and provide a normal round cap insert point? In other words, could the middle of the cap be popped out and a standard round center be popped in to get rid of the Bronco logo?

EDIT: found them on the parts site, looks like the "legs" are a molded part of the wheel and a standard round cap for the center.

 

[my_hero_nero]

How is the cap on there? Are the "legs" of the cap part of the cap or part of the wheel's casting? If the "legs" are part center of the cap, does the center of that also popup out and provide a normal round cap insert point? In other words, could the middle of the cap be popped out and a standard round center be popped in to get rid of the Bronco logo?

EDIT: found them on the parts site, looks like the "legs" are a molded part of the wheel and a standard round cap for the center.

The center caps are removable, that's how you put it on the spare tire carrier when you do a 5 tire rotation or replace a flat. There might be another cap you could use from ford or some sort of vinyl you could add to cover the bronco logo.

 

[my_hero_nero]

Thanks. I did some research yesterday and came up with that as well. Are the wheels shiny or matte black?

They are matte black, yeah sorry the sun on it makes it hard to see.

 

[ControlNode]

The center caps are removable, that's how you put it on the spare tire carrier when you do a 5 tire rotation or replace a flat. There might be another cap you could use from ford or some sort of vinyl you could add to cover the bronco logo.

I was just not sure about where the cap ended or the wheel began. I first I was thinking the red outline was part of the cap (what I was referring to as "legs"), but a in a couple of the angled shots I could not see a seem between that and the wheel. Looking on parts site I see the green area is where the cap is, while the red area is part of the wheel mold.

 

[my_hero_nero]

I was just not sure about where the cap ended or the wheel began. I first I was thinking the red outline was part of the cap (what I was referring to as "legs"), but a in a couple of the angled shots I could not see a seem between that and the wheel. Looking on parts site I see the green area is where the cap is, while the red area is part of the wheel mold.

I see what you are saying. I believe the green is the removable part and the red is part of the wheel.

Sponsored