Search results

I'm looking to swap my door speakers for now and like I mentioned earlier i used the CAR AV 120 harness. The headunit signal out runs to the amplifier input via Kickers kisl rca jack adapters. The output from the amplifier connects back to the headunit. Which I am thinking goes out to the...

Hey thanks for the response. Yeah it not like the old school stuff l started getting with when I started

Okay I thought I had it worked out but wrong again. I swapped out my Pioneer 4 channel amp for a kicker cxa 4 channel amp with high and low input connection. Everything works fine and yes the Chimes come through the dash but I'm okay with that what I'm not okay with is when I receive a phone...

What's up fellas, I have been wanting to upgrade my system for some time now after reading this thread. So now that it's cooling down I started phase 2 of 4 of my upgrade. Which is hard wire in and install the amplifier for the door speak and I chose the Kicker cxa 360.4. It's pretty much idgit...

Dad's truck aka Chucky

All I can say is you got loves that color....

ok I just went ahead and removed the front left crash bar as I will upgrading to the aftermarket ones. The noise only appears as the car is moving slowly Im thinking possibly my brakes are sticking not sure, like I mention earlier the sound appeared some time after I left the alignment shop and...

okay I loosen and set back the front crash bar no rubbing cleareance is good. Now the noise. I checked and double checked nothing is loose ortouching ,

okay I, will give that a try. Thanks

Thanks for the response I got the 12 everything clears I inspected everything and nothing at that point where it looks sketchy. I am rubbing on the front driveside crash bar.

Hi everyone, Yesterday I added a 2 1/2 leveling kit by Faction Fab to my rig and finished up with 18x9 Black Rhino Ruko wrapped with a 265/65 Bridgestone tires. First thing I notice was front driver side rubbed in a full right hand turn. I assumed the passenger side wuld be doing the same in the...

I have beem having the same issue myself... when I accelerate from a stop or come to a quick stop it feels the motor mounts are loose.

very nice.

Not exactly I have sorta made my own because I wanted use of my tray.

No, it appears to be just plain Jane basic system. I have looked for the factory amp rear driver side have not seen one.

I want to upgrade my audio system by adding a amp and subwoofer and upgrading the factory speakers. I have pretty much everything -LC7I -RF Prime 500XD1 -Kicker Subwoofer -Kicker 4 channel amp RF R165 speakers (4) My question is do need to make changes using Forscan? I don't have the...

Sounds and looks like success. I have a question on the speaker adapter mounts .... I checked the metra website and they call for part #82-5604 but another retail I checked said the same as you to use the 82-5605. Did you have any issues when installing your aftermarket speakers?

Thanks for the feedback. I plan on running 91 octane the next time I fill up. As far as tire pressure I run them at 36psi. I have been driving it this week and my mpg average as of today is 21.7. I am still running the factory tire set up for now. Again thanks for the responses.

I just brought wheels and tires with same wheel size, based off a gentleman I met at the dealership with a 2" leveling kit and says he never had an issue. The only difference is used the same brand and model tire from factory just went to a 18" since he brought aftermarket wheels.

Hi everyone, l was curious about something... I changed my oil this weekend like normal but this time I switched to Mobile1 synthetic from Motorcraft synthetic blend. That night I reset my oil life gauge before heading out to work. I normally get about 22.3 to 22.5 mpg. I use 87 octane from...