Search results

I purchased the funnel that was advertised to fit all Ford and Mazda vehicles. It fit my 2019 Mazda MX-5 perfect but not my 2019 Ford Ranger. Opened up the funnel base slot with a rotary tool as you detail. Funnel now fits both my Mazda and Ford. Used the funnel on my recent oil change on...

The aluminum washer has an OD of .870 in, ID .484 in and thickness .077 in. The photo shows the aluminum washer on the adapter with the Fumoto washer nesting on top to illustrate how the aluminum washer would overlay the counterbore. The counterbore depression on the Fumoto washer is @...

From the Fumoto help section: // When installing a Fumoto valve, you'll want to avoid using the specs in your car's owner's manual. Instead, you should follow ours. The chart is coded by series. So, 101 series would include all 101 series valves (F-101, F101S, F101N, F101SX, and B101SX). //...

I just did my first oil change on my 2019 Ranger at 4800 miles. I planned to install the Fumoto F107N valve along with the ADP-107 adapter per the Fumoto website. I have used the Fumoto valves on my other vehicles and they have been excellent with no concerns. Note that the other vehicles all...

I worked for Alan while he was at Boeing. Talk about a company today having problems !! Retired several years ago. A similar issue at Boeing today. More engineers and less Wall Street needed

I have the Lomax tonneau cover on my Ranger and wanted some lighting for when the cover is closed. I bought some LED strip lights from Amazon that use 4 AA batteries. I modified the power box to add a small toggle switch in lieu of the cheap slide switch. Even added labels..... The LED strip...

I have noticed that my windshield wipers often make a "clunk" type sound during operation. It makes this sound both in continuous or intermittent operation. The sound seems to occur as the wipers leave the park position. At times the wipers will operate silently that would be my expectation...

Here's a photo of the seal with the cover moved back. With a black spray in liner, I don't think it is that noticeable even with a white truck.

Received my Lomax cover yesterday. The cover was packaged in a cardboard box and arrived without damage. Agri-Cover does an excellent job with their packaging for shipment. I ordered the cover direct from Agri-Cover and it was shipped out promptly with a notification by email of the FedEx...

My 2019 came with 4 cargo hooks. I showed the salesman the brochure and got basically a non answer. Ordered these from Amazon and moved on. Works better than the factory ones...

On the Agi-Cover website, there is a short video detailing the seal installation for the 2019-ON Ranger at the forward bulkhead. The corner seals nest in place and I don't see how they could be installed on the cover. The center seal segment nests up to the corner seals to make a tight seal...

I will post my assessment of the LOMAX. I probably won’t get it for a few weeks due to holiday and shipping.

My 2019 Ranger Lariat fuel economy from the computer was anywhere from 1.2 to 2 MPG higher than what I was getting by calculating the MPG from the pumped gallons. I did the procedure using a correction factor .944. Both recent fill-ups showed the exact MPG match between the computer and my...

I decided to put a tonneau cover on my 2019 Lariat SuperCab. I looked at hours of YouTube videos to make a decision. In the summer, I haul my pedal drive fishing kayak so i need to have full use of the bed space. I bought the SuperCab to get the 6 ft bed for this purpose. I decided a hard...

I have the Lariat SuperCab FX4 offroad package truck. I decided to go with the Ford kit in lieu of the FOX kit even though the Ford kit was more expensive and they are the same components per my understanding. The Ford kit front coil over struts are set at 2 inch lift versus the 3 inch for the...

typical gas spring dampers have a fluid internal that will be affected by temperature, i.e., they work slower in cold temperatures and vice versa for hot temperatures temperature affects viscosity of the internal fluid and thus dampening rate

I looked at my installation which used the Amazon kit intended for non NA Rangers. My installation is like yours. I checked and there is no flexing of the bed structure on my installation. Is the flexing you see in the bed sheet metal structure or just the bracket you made flexing away from the...

Earlier this year, I installed a catch can on my 2019 Mazda Miata from a well established and respected after market company. Kt cost me about $200. Six months and 4000 miles later, I removed the catch can from the Miata for several reasons - (1) the original hoses used were apparently not...

looks great. Which wheel spacer did you use ?