Search results

I’m running 255/80/17 in those. Have about 16k miles on them. Great all around tire. Great in dirt/sand, have taken them off-road many times and also really good in the rain. Quiet too, no extra road noise since I bought them.

Liking all the progress! Cant wait to see how the rear end turns out with the spring under setup. I’ve been looking at spring under kits for the Tacoma, since the Tacoma weighs roughly the same as our truck, I was wonder how hard would it be to mount to our trucks. Seems like everything’s needs...

First Allen Ruben and now you, sad to see the trucks go, but needs change. Any new projects superdannyboy?

And no i wouldn’t leave my truck looking all goofy. Oh and tires, I’m running 33”. 255/80/17. No rubbing issues. I am running bds crash bars in the front and rear.

You are correct, these are the 3” wide fiberwerx. I had them installed by fiberwerx before I installed my Bajakits. As for the axles. I took out my axle and took them to ORW to have them install the extended shaft on stock joints. I then installed the rest of the kit myself, upper/lower arms...

Wait, you don’t want it to look like this, haha ?

Got it. I’m running the 3inch fiberwerx glass and have 2 inch rear spacers to push my wheels out. I looked into f150 rear axles but they have a different bolt pattern. Not sure if you know if it’s possible, but can axles be extended? Like our stock one? I’ve seen an axle for sale in my area for...

Is the bronco rear axle wider than the rangers? If so by how much?

Looks good Venom, will definitely be following this build! You made the mounts look like it came from the factory like that.

If you really wanna spend some money on wheels. Volk Te37 has a set for trucks that are about 17lbs. But it will cost you 3-4k.

The Method 316’s are 23.5 lbs. 17x8 +25, information from their website.

If you want them I can send them out tomorrow. Just pay for shipping.

Also here are some pics. One small little scratch on the bottom. Other than that they look new.

So from ups the extra small box should work says price starts at $10.20. I think the 8x6x2 box should be big enough.

I believe I still have my set, send me a zip and I can check to see how much shipping would cost.

Can someone with these shocks please tell me what spring rate the coils are. They should have a stamp on the coil with the markings. I’m just curious if they are 550lb or 600lb springs.

Nice setup! Was it hard to weld to the frame after you ran the tubes through the bed?

That cage looks like it adds a lot of travel. I believe that setup is with Deaver springs. over axle. I’ve seen the white ranger on YouTube with a similar setup as mine before he went with the true long travel and linked rear end. But I think 16” of rear travel would be plenty for the...

Another better running Ranger here! Forgot to mention, I have a 2019 with 38k miles. My issues I noticed before the sensor was when I was backing out of the garage and driving from a stop. When I pushed on the gas peddle it was delayed a second or 2 and then it would go. Was getting really...