Search results

Is this a known issue with these trucks? My tires are still decent, except for the inside of my front tires. The inner inch or so is totally worn flat. It’s even on both sides, so I’m thinking not an alignment issue, but maybe a factor set camber issue. I have kept them balanced and rotated...

Isn’t it about time someone released a 65mm throttle body for our trucks? I’m running out of bolt-ons for my ‘22 and basically have done everything save for changing out the downpipe and exhaust (saving for last). I saw the boomba TB spacer/intake manifold spacer combo, but I feel like for the...

I opened up my K+N airbox today to clean and re-oil my filter. Imagine my surprise when this is what I found! I can only describe it as a complete structural failure of the airbox. Almost every point that had a bolt or connector going through it has failed. For the life of me, I have no...

So…I’m looking for some insight into this. I feel like I have what amounts to some driveline “slop”. I’m not sure if this is normal on these trucks, or this is a start to bigger problems. I had a 2006 Dakota that ended up having to have the drive shaft and rear end replaced after similar...

Let's face it, unless you're hauling kids, it's about as useless as the back seat of a Mustang. I'm 6'3", so my front seats are always all the way back. I frequently use the back of the cab for hauling stuff I don't want banging around the bed or exposed to the heat and cold (music gear). I...

I did a few pulls recently, and I just don't think I'm getting the performance I should be. Mind you, I'm no stranger to racing and wrenching on cars, so this is leaving me a bit perplexed. I'm doing a brake stand and launching at 2k, traction control off, and in "sport" mode. When I launch...

Well, I was going to go for the Ford Performance tune, but it seems like they’re leaving a ton of power on the table. In researching, it seems like either Livernois or 5 Star is the way to go. I originally wanted the warranty that comes with the Ford Performance tune, but seeing as I log at...

I was driving my Ranger tonight, and for the first time since I got it, I didn't have the radio on. That's when I noticed it. It's not loud and was apparently being drowned out by the radio before. It's a metallic turbo sound at lower RPM's/speeds. Kind of a whirr, but it sounds like maybe a...

I see them for the Focus ST from Accel and MSD. They are also available for the 2.0 Ecoboost. However, they mention nothing of the Ranger. I'm curious if the Focus ST ones fit our Rangers or not. I might need to contact Holley's (parent company) support and ask. I was wondering if there was...

I have a new 2022 XLT 302A w/ Tech Package. I'm trying to figure out if I definitely have noise canceling or not. I just enabled it tonight using FORScan, but does anyone know for sure? I have the mic above my head for SYNC, so I'm assuming it does. I'm just not sure why it would be...

We're starting with this: Factory options: - 302A - Technology Package - FX4 Off-Road Package - Black Appearance Package - All Weather Mats - Splash Guards/Mud Flaps - Trailer Tow Package - Hard Folding Tonneau Cover Things it should have come with but will add: - Ignition Bezel - Hood Struts...

Has anyone installed this? https://www.stage3motorsports.com/40-2545-19-22-ranger-2-3l-jba-dual-exit-3-cat-back-kit.html If so, what are your thoughts? So far, the absolute best I've heard is the AWE, followed by the Borla system. I like that the AWE is a true 3" system (Borla is 2.75"). It...

I figured I would start this thread so that people can add to it as they come across 3D printable items for our Rangers. I know the ignition bezels are popular, but I'm thinking of things like phone holders, pen holders, tray organizers, and the like, as well. I will say, one of the cool...

I'm looking at this kit https://www.americantrucks.com/max-trac-ranger-250-inch-front-leveling-kit-833825-4.html. I see it comes with differential drop spacers. This is something I don't see on most of the other kits I'm looking at, mainly larger lifts. I'm going to be going no more than 2.5"...

So far, the only two options I've seen out there to replace the intercooler piping are the aFe kit and the Mishimoto kit. Mountune offers new silicone connectors with their intercooler kit, but leaves the stock piping. As metal is prone to heat soak, I've always preferred to use silicone for...

I'm looking at intakes and sheesh, so many options. I'm leaning toward Roush at this point, but they only claim 8 lb ft of torque, no horsepower increase. Mishimoto is 6+ HP on stock everything plus the torque. I like the idea of building a Roush Ranger and will probably get the exhaust as...

I got the call today. 3 days before the tracker stated too! As long as the numbers work on the trade-in of my Escape, I'll be coming home with her tonight. They REALLY want used vehicles right now, so are paying top dollar. I'm hopeful!

Has anyone here tried the Flowmaster Delta Boost on their G5 Ranger? It essentially just re-writes the output from the boost sensor to one of 4 settings to trick the computer into thinking it has more or less boost. It's kind of a hack, but it's bolt-on and easily removable. I would just...