YaBoiNewton
Well-Known Member
Fox 2.0 coilover kit and 255/75r17 tires
Just moved up to 255/80r17 (33") but dont have any good pictures.
Here's the truck with the 33s halfway installed:
Sponsored
I did the leveling kit and left the stock tires on until they were worn through. No regrets there. I got my money's worth on the original tires and spread out the cost of upgrades over a few years.Hi all - brand new to this forum -- and forums in general. I recently bought a new 2024 XLT FX4, 2.3l.
Just getting back on the wagon, my first car at 15 was a '94, and I had a '99 Ranger for quite a while after that!
The new one is bone stock at this point, but I am considering putting on a front leveling kit. The stock wheels and tires are (obviously) brand new and I was planning on leaving them that way until they are end of life, then I'll upgrade/go bigger. I'm worried I'm going to bring the front end up and hate the way it looks without new, bigger tires lol
Anybody have a photo of a level, but otherwise stock rig?
Hi all - brand new to this forum -- and forums in general. I recently bought a new 2024 XLT FX4, 2.3l.
Just getting back on the wagon, my first car at 15 was a '94, and I had a '99 Ranger for quite a while after that!
The new one is bone stock at this point, but I am considering putting on a front leveling kit. The stock wheels and tires are (obviously) brand new and I was planning on leaving them that way until they are end of life, then I'll upgrade/go bigger. I'm worried I'm going to bring the front end up and hate the way it looks without new, bigger tires lol
Anybody have a photo of a level, but otherwise stock rig?
After and before pictures.
this is the eventual vision, great looking truck!I wanna play tooo! Lol![]()
![]()
![]()
Wheel and Tires
Tires, pro comp xtreme mt2 285/70/17,
wheels: pro comp 69 series vintage, flat black, 17x9 -6 offset, backspacing = 4.75
Suspension
Bilstein 6112 front coiler which is almost 2.5" shock body diameter as well as an adjustable 0 - 2.5" height
Bilstein 5160 with remote reservoir, these are supposed to add 2" of travel in the rear over stock.
Thx.Nice looking truck -- same color as mine!
Thanks!this is the eventual vision, great looking truck!
What's the small print on the bed sticker say?Just shy of leveled with some 32s![]()
Fox 2.0 coilover kit and 255/75r17 tires
Just moved up to 255/80r17 (33") but dont have any good pictures.
Here's the truck with the 33s halfway installed:![]()
Amphibian Transport Vehicle (ATV)What's the small print on the bed sticker say?
I waited until the stock tires wore out before I lifted mine. It looks goofy enough with those little baby tires as it is lol the wife’s truck has a level kit with 265/70/17. Still looks small to me but that’s as big as you can go without removing crash bars. I have a 3.5” lift with 255/80/17s (33s).
I waited until the stock tires wore out before I lifted mine. It looks goofy enough with those little baby tires as it is lol the wife’s truck has a level kit with 265/70/17. Still looks small to me but that’s as big as you can go without removing crash bars. I have a 3.5” lift with 255/80/17s (33s).
I waited until the stock tires wore out before I lifted mine. It looks goofy enough with those little baby tires as it is lol the wife’s truck has a level kit with 265/70/17. Still looks small to me but that’s as big as you can go without removing crash bars. I have a 3.5” lift with 255/80/17s (33s).
Hi all - brand new to this forum -- and forums in general. I recently bought a new 2024 XLT FX4, 2.3l.
Just getting back on the wagon, my first car at 15 was a '94, and I had a '99 Ranger for quite a while after that!
The new one is bone stock at this point, but I am considering putting on a front leveling kit. The stock wheels and tires are (obviously) brand new and I was planning on leaving them that way until they are end of life, then I'll upgrade/go bigger. I'm worried I'm going to bring the front end up and hate the way it looks without new, bigger tires lol
Anybody have a photo of a level, but otherwise stock rig?