Genuine ford camera connection location

[harrisonl2088]

Hey so I have a 2020 xlt 3.2 ranger it previously had a different body prior to purchase, now it is fitted with an after market aluminium tray. So the standard reversing camera and sensors have been removed.( all appear to be disconnected at connections above the diff).

I have purchased the genuine Ford universal camera kit (Part Number JC3Z 19G490 H)all of the disconnected connections I can find don‘t seem to match the camera connection ( it was sold as a plug and play kit).

Can anyone tell me where this camera should connect?

Sponsored

 

[airline tech]

Hey so I have a 2020 xlt 3.2 ranger it previously had a different body prior to purchase, now it is fitted with an after market aluminium tray. So the standard reversing camera and sensors have been removed.( all appear to be disconnected at connections above the diff).

I have purchased the genuine Ford universal camera kit (Part Number JC3Z 19G490 H)all of the disconnected connections I can find don‘t seem to match the camera connection ( it was sold as a plug and play kit).

Can anyone tell me where this camera should connect?

Ok, I need some clarification
Can you post a pic of the bed and bumper.
Sorry but now I am thinking the bed and bumper were removed and now has a (Flat Bed) and no tailgate or bumper (etc)

And you want to add back the (Rear) Camera and (Rear Parking Sensors) - Correct?
If I am correct the kit you have is for a F-150 through F-350 Trucks, the US Version Ranger does not have the 360 Cams.
We only have (Rear Cam - Video) when in Reverse and have Parking Sensors that trigger alert when close to an object.
We also have Blind Spot with Cross-Traffic (Alert) that triggers an alert when it picks up cross traffic (when in reverse) - This comes from the (BLIS) modules in the Taillights

Can you be more specific on what you are seeking to do, I am assuming you want to add back in what was removed for the (Flat Bed) - Correct?

If this is the case - I need to know what was done with the (OE) harness, did they modify and change it or are the original connectors just tied back and empty.
I can direct you to the harness information, but you possibly have something we do not have on that harness, and they call it (Rear Fog)

 

[got3fords]

What with all italics? Quite annoying.

 

[RangerBill]

Hey so I have a 2020 xlt 3.2 ranger it previously had a different body prior to purchase, now it is fitted with an after market aluminium tray. So the standard reversing camera and sensors have been removed.( all appear to be disconnected at connections above the diff).

I have purchased the genuine Ford universal camera kit (Part Number JC3Z 19G490 H)all of the disconnected connections I can find don‘t seem to match the camera connection ( it was sold as a plug and play kit).

Can anyone tell me where this camera should connect?

See this link for Australian body and equipment mounting Ranger book, starting at page 112.
https://www.ford.com.au/content/dam/Ford/website-assets/ap/au/owner/vehicle-support/body-equipment-manuals/2021 Ranger V6 BEMM_Final.pdf

 

[RangerBill]

Hey so I have a 2020 xlt 3.2 ranger it previously had a different body prior to purchase, now it is fitted with an after market aluminium tray. So the standard reversing camera and sensors have been removed.( all appear to be disconnected at connections above the diff).

I have purchased the genuine Ford universal camera kit (Part Number JC3Z 19G490 H)all of the disconnected connections I can find don‘t seem to match the camera connection ( it was sold as a plug and play kit).

Can anyone tell me where this camera should connect?

Here is a couple of pages showing the rear camera connector on a North American 2019 Ranger.

Sponsored