Cab Spoiler Options

[foxunderhill]

So, I've been seeing the integrated spoilers on the Silverado Trail Boss, and really like how it squares off the rear of the cab. There's even an aftermarket to get this same look this on older Silverados.

The F-150 now has a factory accessory to achieve the same look.

Our high center stop light already protrudes out and is squared off, do we have any options to sweep the cab roof back a bit without making it look like we have an obnoxious wing on top?

Sponsored

 

[Hickesy]

Any use to you?
https://www.ebay.com/itm/1252440574...1291&msclkid=de44ef95b7eb1e26447e8d295945c1df

 

[adisidoro5]

what about a front visor like on the OBS Fords?

 

[Msfitoy]

Any use to you?
https://www.ebay.com/itm/1252440574...1291&msclkid=de44ef95b7eb1e26447e8d295945c1df

I don't remember paying that much for this spoiler...but I have no regrets...

 

[Hickesy]

I don't remember paying that much for this spoiler...but I have no regrets...

How do you install it, looks great.

 

[Msfitoy]

How do you install it, looks great.

Thanks! I installed this spoiler to help air over my RTT...Installation takes a lot of patience and careful planning...it has strips of 3M VHB on the backside and a channel for silicone which was also provided...it's a giant tube enough for at least 5 installations lol...I used black RTV instead...dry fit first without adhesive and taped the permeter with 1/4" striping tape for location template...after installation, I strapped it tight against the body with duct tape and allow to cure over night...next day, I taped around contact point where the part meets with roof panel leaving a 1/4" path then applied a bead of black RTV to joint...this gives the seam a clean finish...this spoiler can be painted to match but I left it satin black as it came since all of my other accent parts are the same finish...

 

[Hickesy]

That's me out then....lol. I can barely open a tin of beans on my own

Sponsored