2021 Tremor level kit

[ewaltrob]

Why can't a level kit be put in the tremor? what is different besides the fox shocks? What makes the ranger lifts the only available one?

Sponsored

 

[Dgc333]

The Tremor only takes 1" to level it. The kits currently available at 2" or 2.5".

 

[Tremor416]

It takes more than 1" to level a tremor, I think they all sit a bit different. I put the 1" ranger lifts level in mine and it still wasn't level. I ordered the 2" and it looks much better but still not 100% level. Mine has the tow package which i believe makes the back sit higher then the non-tow package tremor which would make sense. at least that's my experience with my tremor.

 

[Dgc333]

It takes more than 1" to level a tremor, I think they all sit a bit different. I put the 1" ranger lifts level in mine and it still wasn't level. I ordered the 2" and it looks much better but still not 100% level. Mine has the tow package which i believe makes the back sit higher then the non-tow package tremor which would make sense. at least that's my experience with my tremor.

I have the tow package too. This is how I determined level.

I measured from the top of the front wheel well to the ground. I then jacked the truck up at the cross member until the bottom of the rocker panel was level. Then measured from the top of the wheel well to the ground again. The difference was 1".

I have seen pictures posted with Tremors having a 2" lift and they look nose high using the rocker as a reference.

Sponsored